big vape cloud

[stuish]

What is 328L

[Marcus]

317L*

And it's the same as Gplat wire.

[decoy]

try a clapton coil it was about the best for flavor and vape ive had(.2 ohms)
but ive modded my dripper for better air flow
awaits enjay

[leo]

Oct 13, 2014 19:16:02 GMT Marcus said:

Like I say, it's all about airflow and coils.
No one can teach you this, do what everyone else does, spend hour upon hour researching every little bit of info you can and watching youtube videos for hours at a time, buy some 20g wire, some 317L and practice.

Hard to tell if you're serious, but if you are.. this ^^^^^^^^^^^^

[Tom]

You have RTA's (rebuildabe tank atomisers).

For ultimate flavour and clouds you want an RDA (rebuildable dripping atomiser).

This is what I have on the way
www.fasttech.com/products/3028/10009122/1879500

hope that helps stuish

I know you already have quite a bit of early knowledge but there might be something that this guy explains that helps

[markm]

RDA = Rebuildable Dripping Atomizer
Which is the normal tool for cloud chasing.

[Marcus]

Oct 13, 2014 20:40:24 GMT leo said:

Oct 13, 2014 19:16:02 GMT Marcus said:

Like I say, it's all about airflow and coils.
No one can teach you this, do what everyone else does, spend hour upon hour researching every little bit of info you can and watching youtube videos for hours at a time, buy some 20g wire, some 317L and practice.

Hard to tell if you're serious, but if you are.. this ^^^^^^^^^^^^

Me? If so, deadly serious.
Too many people want someone else to tell them the magic recipe for blowing clouds.
Do the homework, do your research and be prepared to waste a shit load of kanthal

[Tom]

Oct 13, 2014 20:52:07 GMT Marcus said:

Oct 13, 2014 20:40:24 GMT leo said:

Hard to tell if you're serious, but if you are.. this ^^^^^^^^^^^^

Me? If so, deadly serious.
Too many people want someone else to tell them the magic recipe for blowing clouds.
Do the homework, do your research and be prepared to waste a shit load of kanthal

haha!

while you are right about most of this, I think a few pointers in the right direction are what this forum is all about.

stuish - step 1. get a dripper

[leo]

Oct 13, 2014 20:52:07 GMT Marcus said:

Oct 13, 2014 20:40:24 GMT leo said:

Hard to tell if you're serious, but if you are.. this ^^^^^^^^^^^^

Me? If so, deadly serious.
Too many people want someone else to tell them the magic recipe for blowing clouds.
Do the homework, do your research and be prepared to waste a shit load of kanthal

No, not you, OP. want's to blow clouds... lists a bunch of tanks... is told to get an rda... says he has rda... told to get 317L... asks what 328 is... not sure if serious 

[Marcus]

I total agree with helping people but you have to do some of the foot work.

I guess I just get annoyed with the amount of people I encounter on various forums/groups that just post questions like "how can I blow clouds" with no clue on battery safety or ohms laws etc.
With the stuff out today with the "accident" people looking at cloud chasing really need to do their homework

[Tom]

Oct 13, 2014 21:06:49 GMT Marcus said:

I total agree with helping people but you have to do some of the foot work.

I guess I just get annoyed with the amount of people I encounter on various forums/groups that just post questions like "how can I blow clouds" with no clue on battery safety or ohms laws etc.
With the stuff out today with the "accident" people looking at cloud chasing really need to do their homework

I know what you mean.

When I get interested in something, I normally head on over to forums and youtube and spend a few days trying to absorb all I can.

stuish is new, just needs a nudge in the right direction.

[enjay]

If you're a noob then I say get some regular 24G 0.5mm wire, a couple of sony vtc4's or samsung 20R's, a decent RDA like a tobh V2.5 and a copper mech mod and get practising.

24G is a good all rounder to start with, you can build various ohm coils with it, easy to wrap etc. Those batteries I suggested are both well proven and pretty safe for the job too. Copper mods tend to provide better conductivity for electricity obviously.

I'd stay away from the likes of the fancy wires like 317, gplat, nichrome etc, they're really more for someone who's been at it a while imo. Very easy to go to low, hot spot problems and things like that.

[stuish]

I have done research on ohms and battery safty but im still in the early stages lol

[crin766]

I'm trying to get more vapour too without the inconvenience of dripping. Just got a maraxus mech, kraken and some vtc3's. What I've found is that thinner cotton wicks work much better. My first 10+ attempts kept giving dry hits. Not sure who made my clone but it's got a lip to catch liquid on the deck which others don't appear to have and it's tight in there. Not sure I could get 7 wraps of .5 in mine. Had most luck with 3x twisted .28.

Be interested to hear how you get on with this one.

[enjay]

Oct 14, 2014 19:34:28 GMT crin766 said:

I'm trying to get more vapour too without the inconvenience of dripping. Just got a maraxus mech, kraken and some vtc3's. What I've found is that thinner cotton wicks work much better. My first 10+ attempts kept giving dry hits. Not sure who made my clone but it's got a lip to catch liquid on the deck which others don't appear to have and it's tight in there. Not sure I could get 7 wraps of .5 in mine. Had most luck with 3x twisted .28.

Be interested to hear how you get on with this one.

Get yourself an orchid V3, have you seen the clouds that thing can make? It's like a kayfun lite but with dual air hole, four juice channels and a dual coil set up.