I stick wattage problem

[Greeny1210]

Hi guys

seem to be having a problem with my istick after refiling and replacing my emow tank, the wattage is now going up loads more than the VV which only goes upto about 4 now also it keeps going up and down when pressed a couple of times until you press to stop it

anyone know possible causes ?

[Greg]

Sounds like an atty short or you've compressed the 510 pin in the istick, are you using the ego adaptor ?

[lairey]

The watts or volts is supposed to automatically go up or down if you press and hold the up or down button until you press the opposite button to stop it.

Not sure I fully understand your other problem though???

[jmw2309]

Sticky button causing it to keep changing when you let go of button?

[Greg]

Oh I assumed the wattage is going up by itself when pressing the FIRE button as I've seen that but maybe lairey is right. Do expand on the issue Greeny1210

[prowler]

If you press the up or down button for more than a microsecond, it will start to scroll up or down till it's pressed again.
The wattage or voltage available will be decided by the resistance of the coil used.

This might help...