Nicotine

[danliddle]

If I have some Liquid and its 6mg and I want to get it to 12 mg what base would I use and if i had 0 mg Liquid how much would I use and would it ruin the flavour ? 

[jmw2309]

To make 10ml of 12mg liquid you would need 1.8ml of 72mg/ml base.

If your liquid is already 6mg you need to add 0.9ml of 72mg base

It will effect the flavour as you will be diluting your 6mg liquid down by roughly 10% but it should still taste ok.

[archiecat]

Good question!

[archiecat]

Feb 3, 2015 16:23:25 GMT jmw2309 said:

To make 10ml of 12mg liquid you would need 1.8ml of 72mg/ml base.

If your liquid is already 6mg you need to add 0.9ml of 72mg base

It will effect the flavour as you will be diluting it down by roughly 10% which should not be too bad.

I'm genuinely impressed JMW, my head went into meltdown at the question!

[Roger]

Feb 3, 2015 16:17:45 GMT danliddle said:

If I have some Liquid and its 6mg and I want to get it to 12 mg what base would I use and if i had 0 mg Liquid how much would I use and would it ruin the flavour ? 

To put 6mg up to 12mg, you would need to add an equal amount of 18mg (10ml of 6 and 10ml of 18 will give 20ml of 12mg)  and you will weaken the flavour by 50% unless you use the SAME flavour eliquid at 18mg.

To put 0 up to 12 you would need an equal amount of 24mg liquid.

OR do it jmw2309 way and the flavour loss is minimal.

Have a look at ejuice me up calculator, that has a nic combine feature.

[jmw2309]

0.9ml is slightly rounded up to make measuring easier but is not noticeable difference in my experience.

I assumed you wanted to add plain nic base to it but adding a higher strength of the same juice will elizabeth the small loss of flavour

[Pepperty]

I keep meaning to look into this -- adding nicotine as I have 6 vampire vape flavours at zero nicotine (it was 60 pence a bottle in clearance!) I just wanted to know what flavours I'd like so I'll be wanting it with some nicotine, mind you I vape from 6 up to 12 and steps in between so I'm not that bothered

[Roger]

It's 1ml of 72mg per 10ml of 6mg according to EJMUs' nic combine

and 2ml of 72mg per 10ml of 0mg

[jmw2309]

Feb 3, 2015 16:38:12 GMT Roger said:

It's 1ml of 72mg per 10ml of 6mg according to EJMUs' nic combine

That I think would make it 10% nicotine which using 72g/ml would be 7.2mg

[Roger]

Feb 3, 2015 16:32:26 GMT jmw2309 said:

0.9ml is slightly rounded up to make measuring easier but is not noticeable difference in my experience.

I assumed you wanted to add plain nic base to it but adding a higher strength of the same juice will elizabeth the small loss of flavour

You will then have a 'Queen of juices' 

[jmw2309]

Oops lol

[Roger]

Feb 3, 2015 16:40:05 GMT jmw2309 said:

Feb 3, 2015 16:38:12 GMT Roger said:

It's 1ml of 72mg per 10ml of 6mg according to EJMUs' nic combine

That I think would make it 10% nicotine which using 72g/ml would be 7.2mg

No, I've done it on 2 different combining calcs now and you end up with 11ml of 12mg 

ETA: To do it manually

10 x 6 =60
1 x 72 =72
60+72 = 132
132/11 =12

[danliddle]

I dont think I have a clue where to start working all those percentages out

[Roger]

Feb 3, 2015 18:21:14 GMT danliddle said:

I dont think I have a clue where to start working all those percentages out

If your questions were a bit more specific, ie what you have (what liquid and how much) then we could help you better.  

[jmw2309]

Sorry ignore me then. I am a bit dim.