dual coil NOT sub ohms..

[chuxsta]

what kinda setup would i need to run dual coils with out dropping below 1.6ohms.. 
im thinking of getting the goblin RTA... or a few of them after reading lots of comments on them for the price.. 

but after looking at the deck it would appear dual coils is the only way.. 
my mod wont fire below 1.6.. 
cant afford a new mod at the moment,, but need a new tank as i have had enough of the kayfuns.. 

[Get Off My Cloud]

Then why not just get a tank that can take single coil builds like the Subtank Mini,Lemo,Lemo Drop or the soon to hit the shops Lemo 2?

If you're really set on the Goblin then you're going to have to install two coils of 3.2ohm's each.

When you're building dual coil just double the number you want the outcome to be and that is what each coil must be made at.

[sydsut]

What mod are you using chuxsta as 1.6ohms seems surprisingly high. Even my old egos and evod batteries fire at 1.5 no prob.

[decoy]

a fair amount of .25 kathniel wire should do it
1.5 ohms is pretty high for a mod not to fire below what mod is it
and the mini clouper can be had for around £20 and apart from a few of the early ones going in to melt down its mot a bad mod

[chuxsta]

im using the vamo v5.. and if i recall its limit is 1.6....
i like the sound of the goblin due to the price...
im a cheap skate...

will spend lots of money on the right thing.. but im replacing my smoking addiction so i want to spend as little as possible as i should be quitting all together..

[sydsut]

Vamo v5 specs say 1.5 min but I think the undoubted merits of the Goblin would be wasted with a 1.5 dual coil build. See what others think though.

[Get Off My Cloud]

Mar 25, 2015 0:35:15 GMT chuxsta said:

im using the vamo v5.. and if i recall its limit is 1.6....
i like the sound of the goblin due to the price...
im a cheap skate...

will spend lots of money on the right thing.. but im replacing my smoking addiction so i want to spend as little as possible as i should be quitting all together..

The Subtank Mini is the about the same price as the Goblin both about £25 give or take a quid or two if you're talking about genuine tanks.
The same price again by maybe a quid or two if you're talking clones they're both about the £12 mark.

[decoy]

had a wee google and it will fire down to 1.3ohms

[igual]

My v5 will fire a 1.2 ohm build happily.

[geordie_vaper]

hmmmm i got down to 1ohm on my v5 many moons ago

[Tom]

chuxsta

9 wraps of 32 awg 0.2mm kanthal should do it just nicely...

1.6ohms

www.steam-engine.org/coil.asp?s=dp&r=1.6&awg=32&id=2

[phtumshk]

There was a couple of new lemos & a lemo drop on flea bay for £22 - £24 delivered with option to make an offer on the drop.

[chuxsta]

Mar 25, 2015 8:40:12 GMT Tom said:

chuxsta

9 wraps of 32 awg 0.2mm kanthal should do it just nicely...

1.6ohms

www.steam-engine.org/coil.asp?s=dp&r=1.6&awg=32&id=2

bejebus.. that would take my head off.
would have to drop down to super low nicotine levels
but i have to get away from these frigging kayfuns.. as much as i love them im starting to hate them. 

[chykensa]

Why are you hating the Kayfuns, chuxsta? Perhaps we can help you to get them hassle-free and working a treat; they are great atties if you set them up properly (not that you aren't, you understand!) and can give a great vape.
Give us a bit of information about the problems you are experiencing and we'll see if we can point you in the right direction.

[chuxsta]

Mar 25, 2015 23:56:52 GMT chykensa said:

Why are you hating the Kayfuns, chuxsta? Perhaps we can help you to get them hassle-free and working a treat; they are great atties if you set them up properly (not that you aren't, you understand!) and can give a great vape.
Give us a bit of information about the problems you are experiencing and we'll see if we can point you in the right direction.

hey.. thanks for the help... 

i have an age old issue with the new kayfun due to it been a clone.. 
hell no am i going to pay for the genuine due to the price.. 
im trying to lower my nicotine addiction costs.

it leaks when not upright..
have the wick over the juice channels.. 
its built correctly.. i can build the thing blind folded using my feet have done it that many times.. 
the supplier even sent me 2 different o rings for the one below the deck that is known to cause issues.. 
the larger one i cant screw the deck down properly it feels like its cross threading when its not even tried lubing the ring ( no pun intended ) .. and in the attempt to screw it down i rip my skin to shreds on the deck.. 
with the other o ring its better but will still leak through air holes when not up right.. 

i have spent hours reading US UK forums on the kayfun issues and tried everything.. 
i just want an easy life i know i would have one if i got a genuine kayfun.. but car is due an MOT etc etc. lol