VapingBad
Mod Maker
Mr Fix-it
Joined:January 2014
Posts: 13,798
Location:
Likes: 14,172
Recent Posts
Last Online Aug 19, 2023 21:23:33 GMT
|
Post by VapingBad on Apr 19, 2015 23:13:25 GMT
What power do you run your origenny at VapingBad ? The krakens I have here are fine at 117W (0.15 ohms on a mech). Would love to try an origenny if I could drop to 0.1 ohm or less. You got me hopes up buddy. Well I don't go over 28 W often on a Kraken with 2.5 mm ss rope, but the Origenny I can do 40 W (max for the DNA40) and it's a lovely vape, but get over niced in no time, usual is 32 - 34 W with 10 mg liquid. I drill the wick holes to 3.2 mm so I can use larger ss rope & the mesh can go below the deck, no leaks and I am still on the last but one airflow where the Kraken would be full open. But it you are using cotton or silica there are 4.5 mm wick holes, the deck is only about 2 - 3 mm thick so the liquid is closer to the coil and I think this is one of the things that make it better. If you get one I would get it from GearBest, had 2 other types and not as good and it has both PMMA and SS tank sections.
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online May 2, 2024 19:45:46 GMT
|
Post by blakey on Apr 20, 2015 15:34:04 GMT
Everything I've ever bought really monty . . . . mainly because I buy too much in the first place, so nothing gets used exclusively. Boredom usually strikes first, before any technical failure. Mods all in perfect working order: GGTS GGTB Shockwave Silver Bullet Mako Maksi Darwin Rebuildable Atomisers: GG Odysseus GG Penelope IGO's Two drippers that I can't remember the name of, one from a Portuguese gentleman & the other from Germany . . . both were pretty ground breaking at the time, as China hadn't swung into the production that it has now. blakey might remember what they were called . . . . . Blakey needs pics, there's been a whole heap of drippers been released over the months
|
|
*-SARIN-*
Super Member
Science by choice, chemistry by ability.
Joined:November 2014
Posts: 1,743
Location:
Likes: 1,306
Recent Posts
Last Online Jan 7, 2016 18:02:49 GMT
|
Post by *-SARIN-* on Apr 20, 2015 18:04:27 GMT
For me it would have to be my brass Nemmy, the abuse that it's taken and still it goes on, out performing numerous other newer mech mods. I'm annoyed at the stuff that i've either sold or given away over the years, especially all of my gennies as i really miss them now. I sold then to purchase a GP PAPS and Heron but never did.
|
|
|
Post by Perpetua on Apr 20, 2015 19:40:36 GMT
Two drippers that I can't remember the name of, one from a Portuguese gentleman & the other from Germany . . . both were pretty ground breaking at the time, as China hadn't swung into the production that it has now. blakey might remember what they were called . . . . . Blakey needs pics, there's been a whole heap of drippers been released over the months Finally remembered the German one Blakey . . . . The Bulli from Cetin! Still thinking on the t'other . . . . it's in a box somewhere.
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online May 2, 2024 19:45:46 GMT
|
Post by blakey on Apr 20, 2015 19:56:01 GMT
Blakey needs pics, there's been a whole heap of drippers been released over the months Finally remembered the German one Blakey . . . . The Bulli from Cetin! Still thinking on the t'other . . . . it's in a box somewhere. Ah yes, the bulli -I still have my two but they are tanks not drippers Cracking performers but terrible juice capacity
|
|
|
Post by Perpetua on Apr 20, 2015 20:02:54 GMT
Finally remembered the German one Blakey . . . . The Bulli from Cetin! Still thinking on the t'other . . . . it's in a box somewhere. Ah yes, the bulli -I still have my two but they are tanks not drippers Cracking performers but terrible juice capacity I got the adapter thingy Blakey . . . so never used it as a tank.
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online May 2, 2024 19:45:46 GMT
|
Post by blakey on Apr 20, 2015 20:13:27 GMT
Ah yes, the bulli -I still have my two but they are tanks not drippers Cracking performers but terrible juice capacity I got the adapter thingy Blakey . . . so never used it as a tank. Oh, I never got that- I got the kit to convert it to them little blue tanks but never used them I have no Idea of a Portugal made dripper from that era though I do still have a couple of original DiDs from metal madness that perform very well and I still have my immortaliser RDAs from a while back and they perform very well too but the thing that most of the old gear lacked was airflow adjustabilty. And that's why I think a lot of the old stuff falls short against a good deal of the new stuff.
|
|
|
Post by Perpetua on Apr 20, 2015 20:30:39 GMT
I got the adapter thingy Blakey . . . so never used it as a tank. Oh, I never got that- I got the kit to convert it to them little blue tanks but never used them I have no Idea of a Portugal made dripper from that era though I do still have a couple of original DiDs from metal madness that perform very well and I still have my immortaliser RDAs from a while back and they perform very well too but the thing that most of the old gear lacked was airflow adjustabilty. And that's why I think a lot of the old stuff falls short against a good deal of the new stuff. Don't tell me I've something you haven't Blakey! The Portuguese man only made about 50 of these drippers, pretty basic . . . . much like the IGO-L internally, but the weight of a small car! My DID I sold pretty sharpish, never used it - genesis atomisers weren't for me. Airflow adjustment, has never bothered me much either . . . . although with the new breed of sub-tanks I do appreciate it.
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online May 2, 2024 23:59:11 GMT
|
Post by Deleted on Apr 20, 2015 20:33:59 GMT
I still have a silver bullet from classies Perpetua and I remember the Bulli LOL I got the taifun original (not gs or gt) shortly before hand. It was when the whole of europe were out of spheroids (mad rush one new year LOL) and I had to get a spheroid or a spheroid clone Everyone said the bulli was the poor man's spheroid - it really wasn't
|
|
|
Post by Perpetua on Apr 20, 2015 20:37:37 GMT
I still have a silver bullet from classies Perpetua Does it work though Jane?
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online May 2, 2024 23:59:11 GMT
|
Post by Deleted on Apr 21, 2015 5:27:24 GMT
Haven't used it in a while but believe so Perpetua
|
|