cloudyprism
New Member
Joined:April 2015
Posts: 22
Location:
Likes: 18
Recent Posts
Last Online Apr 29, 2015 19:36:21 GMT
|
Post by cloudyprism on Apr 22, 2015 20:09:35 GMT
Hey guys!
I'm not sure how to explain first of all! Ok, i bought a premade coil a little while back - like a naturevape/unicoil. I have been using it the past few days, and went to rewick it. When i opened it up, i noticed the coil was turned so the wick was not facing the side of the hole... So, with me being a bit stupid thought 'ah ha... i'll get some tweezers and gently turn the coil back!' However, i kinda bent the coil so it isn't an even cylinder (/facepalm) I finally figured out that i turned the base of the coil and it turned back round. I rewicked it, it reads at a lower ohm (1.3 -1.5)
Have i kind of buggered it up abit with the coil itself uneven (and possibly touching each other on different parts of the coil) Vaping it atm, vapes ok... i think, but not quite as pokey. It's my only coil atm, so when i bent it i thinking 'oh balls'
|
|
Greigster
Mod Maker
Provari Pimper
Joined:November 2012
Posts: 4,311
Location:
Likes: 3,225
Recent Posts
Last Online Jul 11, 2024 8:49:03 GMT
|
Post by Greigster on Apr 22, 2015 20:20:06 GMT
What attie is it on and what should the ohms be?
|
|
igual
Super Member
Guide Maker
Joined:July 2014
Posts: 3,402
Location:
Likes: 2,874
Recent Posts
Last Online Jun 26, 2017 16:25:16 GMT
|
Post by igual on Apr 22, 2015 20:23:40 GMT
Is it a protank styled coil like this?
|
|
cloudyprism
New Member
Joined:April 2015
Posts: 22
Location:
Likes: 18
Recent Posts
Last Online Apr 29, 2015 19:36:21 GMT
|
Post by cloudyprism on Apr 22, 2015 20:23:58 GMT
I have it on the Mow tank (smaller ego one) I think the ohms were reading at 1.7-1.5 before! I was just a bit worried i'd completely screwed it up, i was pretty much using standard kanger coils before so was pretty new to me, when i saw it turned i thought ok... how do i fix this. When i dry burned i did notice from me making the coil uneven the last few coils took abit more to heat up.
|
|
cloudyprism
New Member
Joined:April 2015
Posts: 22
Location:
Likes: 18
Recent Posts
Last Online Apr 29, 2015 19:36:21 GMT
|
Post by cloudyprism on Apr 22, 2015 20:25:22 GMT
Is it a protank styled coil like this? Yea, sorry! It is pretty much like that, the coil in the midst of panicking i kind of made unequal but managed to rewick it!
|
|
igual
Super Member
Guide Maker
Joined:July 2014
Posts: 3,402
Location:
Likes: 2,874
Recent Posts
Last Online Jun 26, 2017 16:25:16 GMT
|
Post by igual on Apr 22, 2015 20:32:25 GMT
Ahh I think the now tank normally uses the duel coil new versions. Check out the unicoil from virtual vape. Sounds like you've just deformed the coil slightly. As long as its vaping safely no shorts it should be OK. Might be worth saving up the old heads and recoiling them. Never done the newer ones but I believe that you can use the older styled coils with a rubber grommit.
|
|
cloudyprism
New Member
Joined:April 2015
Posts: 22
Location:
Likes: 18
Recent Posts
Last Online Apr 29, 2015 19:36:21 GMT
|
Post by cloudyprism on Apr 22, 2015 20:41:22 GMT
Ok cool, thank you guys... i just thought i might have damaged it beyond repair. If it shorts (currently on an istick30) does that mean it just wont fire? I have saved my old coils up, they were the new (At the time) dual ones i think. I'll have to have a look at rebuilding those (which i wasnt too sure if i could when i got them in a starter pack) I was looking at unicoils and naturevapes earlier too - wasn't sure how to explain what i had done! Takes a little more to vape but as long as im not causing any damage it will have to do for now
|
|