kangertech sub tank coiling tips

[decoy]

i thought idd best start this else were what tips do we have of fettling the subtank
im still struggling to recoil and more rewick the occ heads with out nice big dry hits at higher power 20 watts +

i think ive cracked the rebuildable part after using a hacksaw on it(i use near nuff 100%vg in it) 35 watts so far and no dry hits but nic rush to heck and back so defo a mod worth doing as air flow is on parr with the occ ones(sut the bottom so as it has 2 slots instead of 4 holes and cut 2 slots along the side)

they are a lush tank but dry hits are not nice

[autumntwist32]

Have you seen the guide Tom did for those heads decoy

allaboute-cigarettes.proboards.com/thread/50953/kanger-subtank-occ-rebuild-guide?page=1&scrollTo=886449

[decoy]

i followed that to the letter even used jap type cotton but as soon as i got above 20 watts dry hits

[autumntwist32]

Awww, that's a shame I hope someone comes along who can help.

[Greg]

Apr 23, 2015 18:49:13 GMT decoy said:

i thought idd best start this else were what tips do we have of fettling the subtank
im still struggling to recoil and more rewick the occ heads with out nice big dry hits at higher power 20 watts +

i think ive cracked the rebuildable part after using a hacksaw on it(i use near nuff 100%vg in it) 35 watts so far and no dry hits but nic rush to heck and back so defo a mod worth doing as air flow is on parr with the occ ones(sut the bottom so as it has 2 slots instead of 4 holes and cut 2 slots along the side)

they are a lush tank but dry hits are not nice

You could try drilling the holes bigger in the OCC head then bigger diameter coil and wick 

[decoy]

the occ heads are good when new and we should be able to get the sam just shy of 30 watts useage outa them but if i put any less coton in there wont be much point

after the mods i did to the rebuildable head im v happy with that just want to work out these occ ones

[letsavit]

Apr 23, 2015 18:49:13 GMT decoy said:

i thought idd best start this else were what tips do we have of fettling the subtank
im still struggling to recoil and more rewick the occ heads with out nice big dry hits at higher power 20 watts +

i think ive cracked the rebuildable part after using a hacksaw on it(i use near nuff 100%vg in it) 35 watts so far and no dry hits but nic rush to heck and back so defo a mod worth doing as air flow is on parr with the occ ones(sut the bottom so as it has 2 slots instead of 4 holes and cut 2 slots along the side)

they are a lush tank but dry hits are not nice

That's a great idea but you can get as much air as you can but if the juice channels are maxed out on flow rate then that's your next bottle neck.

[decoy]

if you look ive opened up the air flow as well it has n half changed it

[letsavit]

Apr 24, 2015 0:18:59 GMT decoy said:

if you look ive opened up the air flow as well it has n half changed it

Yes I was a bit tipsy when I posted last night, see what you have done, more air and juice.. 20watts is max from these for me too but that's more than enough for myself. When you get your TFD up and running in temp mode you can max it out and it will report back the max watts off the atty without the burnt hits..

[buggritt]

I can't tell from reading this if you have filed or dremelled out the juice channels decoy. A few people have done this for high wattage vaping.

[decoy]

Apr 24, 2015 13:49:42 GMT buggritt said:

I can't tell from reading this if you have filed or dremelled out the juice channels decoy. A few people have done this for high wattage vaping.

ive cut 2 slots in the side for better juice supply and ive turned the 4 holes for air intake into 2 slots for better air flow

[buggritt]

I meant in the base you screw the head into. I don't know if that's what you mean? Just to make the existing channels wider.

[tim]

That is a very good idea decoy, but does it p*$$ juice if not in use? I only use mine out and about and leave on a stand overnight. Even when three quarters full it doesn't leak, just wondering if it might with the extra juice flow.

Let me know if it does, I can always stand it upside down if modified I suppose.

Cheers

[decoy]

not had any leeks as yet but did put the cotton up to the cuts
have ordered some more from fast tech to have a bit more of a play

[decoy]

still cant get the wicking right on the standard ones humph