need a new mod .....help

[lenny59]

Ok......here it goes

had a Cloupour ,,,,,,Died on me ( 3 weeks)

had a Sieguile.....Died on me ( 3 weeks)

Spent 80 smackers and I aint gonna spend anymore on BOXMODS

So my question is,,,,,,,

Whats the best mechanical mod I can get 18350/18650 . . . Not fussed

Please help

[Deleted]

do you like wooden mods i got a kamagong one up on the classies
cooper wiring and a switch dual 18650 with 2 vtc4s

[lenny59]

sounds good fella

I'm wanting advice . . . all due respect but not a seller,,,,,

hope you sell the item

[Deleted]

there will be some nice mods coming out full mech and fit neatly in your hand
iam waiting on a few to hit the market iam moving away also from electronics
to just plain old metal to batterys

[Deleted]

this is a wee cracker i still cant believe theres 2 x 18650
in there no wiring will take a pounding and still work

[Get Off My Cloud]

www.fasttech.com/products/0/10011519/1997100-dovpo-gx-200-mechanical-mod
There you go cheap as chips dual 18650 mechanical box mod with the safety benefits of a regulated device.



Working voltage 3.2- 4.2V
Max output 20A
Output voltage is the same as battery voltage
Lowest resistance 0.2ohm
Low voltage protection < 3. 2V
Over current protection > 30A
Two 18650 batteries parallel connection, can be charged with micro-USB cable or 18650 charger
Short-circuit and reverse connection of the battery power terminal will be protected
The height of the connector's positive electrode can be adjusted by screwdriver
Charging voltage: Micro charger DC5V
Max charging current: 800mA
Automatic circuit-breaker triggered after 15 seconds smoking

[Q]

If you want a straight forward tube mech mod you cant go wrong with the Penny from Focalecig, it's 18650 only but sweet as a nut.

If you need a set so you can run 18350 I'd have to recommend the good old Nemesis

[thatguy]

+1 for the nemesis. Other options are the stingray - seemless threading on tubes and hits hard, a caravela - seperate tubes for 18650 18500 and 18350, a 4nine(perhaps the smallest of the mods, especially in 350 mode, it's ultra dinky).

All of these will do 18650 and 19350 for you.

[monty]

Died in 3 weeks = get your money back.

[sonicflowjoe]

I'd recommend a stingray if you like tube mods. Easily adjustable for variation in battery length and floating pin at the top. Hits hard and a lovely looking mod IMO

[prr]

Stingray for a mech tube, kato for mech box.

[glen]

May 5, 2015 10:52:12 GMT prr said:

Stingray for a mech tube, kato for mech box.

Beat me to It, 
You snooze, you loose

[lairey]

I'd recommend a SMPL mod... only 18650 but so small you don't really need to worry about smaller... I got both of mine from Evolution Vaping

[Deleted]

May 5, 2015 1:49:52 GMT Get Off My Cloud said:

www.fasttech.com/products/0/10011519/1997100-dovpo-gx-200-mechanical-mod
There you go cheap as chips dual 18650 mechanical box mod with the safety benefits of a regulated device.



Working voltage 3.2- 4.2V
Max output 20A
Output voltage is the same as battery voltage
Lowest resistance 0.2ohm
Low voltage protection < 3. 2V
Over current protection > 30A
Two 18650 batteries parallel connection, can be charged with micro-USB cable or 18650 charger
Short-circuit and reverse connection of the battery power terminal will be protected
The height of the connector's positive electrode can be adjusted by screwdriver
Charging voltage: Micro charger DC5V
Max charging current: 800mA
Automatic circuit-breaker triggered after 15 seconds smoking

I have one of these.

Cracking little thing

[lisburnvapes]

Hard to beat the good old 'Nemesis' , clones are cheap as chips, set up in 18650, 18500 or 18350 stealth mode, also comes with a kick ring so you can add a bit of VV/VW if the notion takes you, adjustable 510 connection and virtually indestructible , IMO