Gizmo V2 fail

[tim]

I got a Lemo 2 air flow stuck in the mod at Vapefest. The base got stuck in the 510 when I was swapping tanks and it dumped about 1.5ml of juice into it. No shorting, but not impressed at all. I payed £114 all in with the 18650 extension (which is a slightly differtent coulour to the mod!!!!), so they will be getting a very stiff complaint from me when I finally recover from the weekend activities!

Fixed now, but some minor damage to the 510 bottom, not that you can see it, but that's not the point. Very cross

[decoy]

its a pain ive had many times
sometimes if your atty has a flat head screw you can take the bottom off the gizmo, pop the 510 pin out and undo the atty using a flat head
most of the time youu can get away with rocking the top of the atty in a circular motion whilst applying a small amount out undoingness to get the atty out with a little muttering
i have to say worst case is dump the juice and undo by gripping the deck of atty with el mucho muttering
i only tighten my attys using the drip tip in the gizmos

[tim]

Aug 10, 2015 22:23:08 GMT decoy said:

its a pain ive had many times
sometimes if your atty has a flat head screw you can take the bottom off the gizmo, pop the 510 pin out and undo the atty using a flat head
most of the time youu can get away with rocking the top of the atty in a circular motion whilst applying a small amount out undoingness to get the atty out with a little muttering
i have to say worst case is dump the juice and undo by gripping the deck of atty with el mucho muttering
i only tighten my attys using the drip tip in the gizmos

Good advice I'd say decoy. Thanks

I tried all the things you mentioned, but had to resort to pliers on the 510 base, which has damaged it slightly. I'll be looking for a free replacement from them. At least I didn't damage the Lemo

[decoy]

what do you think of it so far
i got the clone v2 24mm and 2 v1 17,s and the v1 17 is just soo much nicer in the hand
ive got rid of the magnets in one of the 17,s and the 24 and it do make a big diff to the voltage drop

[majorhazzard]

Aug 10, 2015 22:23:08 GMT decoy said:

 whilst applying a small amount out undoingness 

That is a great word.. I'm going to see how many times I can slip it in to a conversation   :-)

[tim]

Aug 10, 2015 22:34:52 GMT decoy said:

what do you think of it so far
i got the clone v2 24mm and 2 v1 17,s and the v1 17 is just soo much nicer in the hand
ive got rid of the magnets in one of the 17,s and the 24 and it do make a big diff to the voltage drop

Missed this before. Sorry.

I have the v2 24 and I must say, it really is a lovely mod. I like the stealth size of it. My only problem with it (before the locked on atty), is that the battery has a rattle. I'm gonna get a spring too.

I don't use any 17mm atty's, but I think it wouldn't make that much difference to my rough hands. Even with the extension on it is hardly noticeable in my hand.

All in all, I love this mod. Which is just as well because moh keeps reminding me how much I payed for it.