whats best ohm build to use witha panzer clone mech ?

[banditruss]

hi all just picked up a panzer clone any opinions on which is best size ohm to use on it ......not like i just tried forgot id got .15 ni200 coil in subtank mini ..burnt my head off lol any opinions gratefully received probably  use a rda but might recoil occ subtank coil for it depending on your opinions

cheers russ 

[thatguy]

With mech mods, the resistance you build at is determined by the atty you use and personal taste. The mod itself makes no difference. I like 0.4 on krakens, 0.5 on sub tanks and between 0.25 and 0.4 with drippers. Just be sure to stay within your cells limits.

[banditruss]

i didnt know how htey work presumed you had to have a bigger resistance as i say the .15 in the subtank just burnt up but is that becasuse it was ni200 and not kanthal battery wise got one of the efest 18650 2800mah so called 35a (20)
cheers

[letsavit]

thats because you're running at over 100watts.

Real Battery details from Ripshod






Ohms law

Stop now and do some research mate.

[decoy]

just to be cheeky anybody know were to get the aw 18500,s from

[banditruss]

i only tried that tank to see if mod worked as wife brought it into me in hospital didnt think it would work as the aspire cf needed .3 and above (this is getting sold brand new unsed, another one of my impulse buys !)...so when it fired i was alittle shocked ...looked at the ohms law but dont understand it /use it looked on net but cant find anything as of yet ...lol stil confused ill keep looking

[Ripshod]

Aug 15, 2015 17:15:28 GMT decoy said:

just to be cheeky anybody know were to get the aw 18500,s from

Personally I only ever get AWs from cloud9 - one of the few authorised sellers in the uk.

[decoy]

Aug 15, 2015 17:29:50 GMT Ripshod said:

Aug 15, 2015 17:15:28 GMT decoy said:

just to be cheeky anybody know were to get the aw 18500,s from

Personally I only ever get AWs from cloud9 - one of the few authorised sellers in the uk.

[Greg]

Aug 15, 2015 17:15:28 GMT decoy said:

just to be cheeky anybody know were to get the aw 18500,s from

www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectID=16049

[Ripshod]

Thought you'd ninja'd me for a second there Greg.

www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/B63-19

[Greg]

Aug 15, 2015 17:36:32 GMT Ripshod said:

Thought you'd ninja'd me for a second there Greg.

www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/B63-19

So did I 

[decoy]

thanks guys
need them for gizmo v2 clone that im loving now ive sorted the voltage drop and the sharp edges

[letsavit]

Got my AWs from vape escape, not sure if cheaper or authorised but pretty safe bet to say they're pukka...

[decoy]

Aug 15, 2015 16:51:20 GMT banditruss said:

i didnt know how htey work presumed you had to have a bigger resistance as i say the .15 in the subtank just burnt up but is that becasuse it was ni200 and not kanthal battery wise got one of the efest 18650 2800mah so called 35a (20)
cheers

they arnt bad batts and are more than up to the job of running your subtank at .5 ohms
a mech is just a batt and switch with no safety bits like a regulated mod so you have to be a bit more careful is all
main thing is to check your atty,s resistance before you use it 1st time
i would say dont use ni200 in a mech but you have found that out for your self

now time to get shot
peps harp on about ohms law ect but the main thing is to use good batts and know there limits (how low you can go with out blowing yer hand off)and stay well within them

if all else fales when the thing gets hot chuck it far from you and peps

[banditruss]

lol great thx thats more like the info i was after put it up more sale now any way but not bothered if it doesnt go ill have a play with it ,reason to get rid is im on all tc mods so dont really want a different set up for the mech ...even though i really like it ...ahh well we'll see what happens..cheers