Chalice III set up

[ginge7289]

I recently got a chalice BF atty to try out Squonking, but I'm curious to see how other users are setting them up?

I have tried the way Todd set it up in his review and that doesn't work for me. I would need to Squonk after every draw to keep the wick saturated and even then it still dries out super quick.

I then tried pbusardo's method of tucking cotton under the coil and over to the opposite side of the deck, again that didn't work as it had to much cotton and it wasn't wicking well.

Im considering trying a 2mm silica set up similar to a katfun/spheroid but take the legs under the coil and leave them vertical going up the inside of the chamber?

Im currently using a HoL Guevara in it which destroys a coil within 30 secs if the wick isn't super saturated.

If you could let me know what Ohms, Watts and the wick set up you use that would be a great help, photos would be even better.

Thanks in advance.

[Dave]

I'm in the same boat kid

Its ruining my squonking enjoyment after all of the hype icon_shoppingm

[chrisjw]

I've found that the art to squonking is the less cotton, the better....I wick them all with the legs just touching the deck.....Seems to work in the atties I have, although I also am not overly impressed with the Chalice...........Best one so far for me is the Zenith.



"Life...........is just a bowl of tricks!!!!!!"

[ginge7289]

I think I should try with a different juice. I tried the silica build yesterday and that didn't work either.

blakey how do you have yours set up?

[blakey]

Cotton just touching the deck
Coil raised in front of the air hole

[robby]

It`s a small atty and juice well, I would get a few vapes at 15 watts ish, but anything higher would be impractical

[ginge7289]

Sept 6, 2015 9:18:40 GMT robby said:

It`s a small atty and juice well, I would get a few vapes at 15 watts ish, but anything higher would be impractical

That's roughly where I want to be, around 1.5ohm at between 10 - 15 watts. But at the moment the juice turns to ash after the first draw. I have some new tubing hopefully arriving tomorrow, Ill try with a different juice that is not a PITA to vape.

[ginge7289]

Different juice in the Chalice with the set up blakey posted above @ 1.6ohms and its vaping great. Just need some tube to turn up now so I don't have the taste of tobacco and Muffin man mixed together