Dna200

[flavourtank]

Hi people

Why are my ohms up and down?

I've changed coils loads of times but never can get a solid reading.

If I lock ohms it still changes.

On the escribe software the atomizer analyzer is jumping around.

It is really doing my head in

VapingBad would you be able to help and explain in simple terms please

[glen]

I'm really sorry it's doing that flavourtank, but I never had that happen with it, please keep me posted
Cheers mate
Glen

[flavourtank]

Sept 8, 2015 21:24:54 GMT glen said:

I'm really sorry it's doing that flavourtank, but I never had that happen with it, please keep me posted
Cheers mate
Glen

it ain't your fault mate, it's prob me doing something wrong that's so simple lol

[VapingBad]

The underlying problem is probably a connection issue, maybe a poor spring in the 510 or and atty with a short 510 not pressing the spring. How much is it jumping about on the analyser, the last decimal place is OK as you will pick up environmental electronic noise at those levels.

When you lock the ohms is the value on the DNA's screen changing or is just in the analyser.

[glen]

Sept 8, 2015 21:29:04 GMT flavourtank said:

Sept 8, 2015 21:24:54 GMT glen said:

I'm really sorry it's doing that flavourtank, but I never had that happen with it, please keep me posted
Cheers mate
Glen

it ain't your fault mate, it's prob me doing something wrong that's so simple lol

Still don't like the idea of selling you something that you can't get on with

[VapingBad]

Maybe somthing simple glen today I have read the Sharks are having probs due to long 510 with some atties.

[VapingBad]

Could be the centre pin getting stuck in the pushed down position.

[glen]

Sept 8, 2015 21:34:48 GMT VapingBad said:

Maybe somthing simple glen today I have read the Sharks are having probs due to long 510 with some atties.


I only ever had a subtank or goblin mini on it, and never had the ohms jumping around, and especially if the atty was locked,  I've read a few things on the early adaptors forum about it happening though

[flavourtank]

Sept 8, 2015 21:32:31 GMT VapingBad said:

The underlying problem is probably a connection issue, maybe a poor spring in the 510 or and atty with a short 510 not pressing the spring. How much is it jumping about on the analyser, the last decimal place is OK as you will pick up environmental electronic noise at those levels.

When you lock the ohms is the value on the DNA's screen changing or is just in the analyser.

it was jumping on device 0.25, 0.30,0.35 0.44 and also doing same on analyser

The analyser is going up and down 0.444 0.498 0.475

[VapingBad]

Sept 8, 2015 21:43:38 GMT flavourtank said:

Sept 8, 2015 21:32:31 GMT VapingBad said:

The underlying problem is probably a connection issue, maybe a poor spring in the 510 or and atty with a short 510 not pressing the spring. How much is it jumping about on the analyser, the last decimal place is OK as you will pick up environmental electronic noise at those levels.

When you lock the ohms is the value on the DNA's screen changing or is just in the analyser.

it was jumping on device 0.25, 0.30,0.35 0.44 and also doing same on analyser

The analyser is going up and down 0.444 0.498 0.475

Is that the big number at the top, in that order and while not firing?

[flavourtank]

Sept 8, 2015 21:45:19 GMT VapingBad said:

Sept 8, 2015 21:43:38 GMT flavourtank said:

it was jumping on device 0.25, 0.30,0.35 0.44 and also doing same on analyser

The analyser is going up and down 0.444 0.498 0.475

Is that the big number at the top, in that order and while not firing?

that's the big bold number

It's going

0.317 0.322 0.333 and goes up whilest not firing

[VapingBad]

flavourtank 510 or atty most like

Check the centre pin is moving freely on the spring by pressing with an allan key or similar.

Do you feel pressure from the spring on the last turn or 2 screwing the atty in?

I assume it's all clean and you checked the coil connections.

[VapingBad]

Also look at the analyser as you tighten & loosen the atty, some atties don't like too much pressure from the spring.

[flavourtank]

Sept 8, 2015 21:53:24 GMT VapingBad said:

flavourtank 510 or atty most like

Check the centre pin is moving freely on the spring by pressing with an allan key or similar.

Do you feel pressure from the spring on the last turn or 2 screwing the atty in?

I assume it's all clean and you checked the coil connections.

spring in 510 works fine, the coil connections are fine

It's got to be something with the atty not connecting to 510 pin properly

It's a subtank mini

[VapingBad]

Sept 8, 2015 22:05:22 GMT flavourtank said:

Sept 8, 2015 21:53:24 GMT VapingBad said:

flavourtank 510 or atty most like

Check the centre pin is moving freely on the spring by pressing with an allan key or similar.

Do you feel pressure from the spring on the last turn or 2 screwing the atty in?

I assume it's all clean and you checked the coil connections.

spring in 510 works fine, the coil connections are fine

It's got to be something with the atty not connecting to 510 pin properly

It's a subtank mini

Do you have any Ni200 you can bung in a dripper or something you can try, I have seen a lot of complaints with sub-tank Ni heads and IIRC they don't like to be tightened down too much.