'Scottish roll' (new thick wicking method)

[Deleted]

Sept 22, 2015 6:49:12 GMT decoy said:

ok im impressed
works ruddy well on the doge

cant wait to try this out left my drippers at mates so it be at weekend seems everywhere i read about it all good things 

[Get Off My Cloud]

I've been chucking a good fat lump of cotton in my drippers for a while just stood to reason to me the more cotton the more juice it holds, hadn't been doing this rolling malarky though.
Tried it out today doesn't seem to make much difference to me, maybe the rolling helps tanks wick faster i'll try that out.

[Deleted]

I've always had as much cotton in the coil as poss.

Keeping it really tight stops all the snap, crackle and popping.

Just the tails in the well though.

[SteveF]

Works well enough in my Subtank RBAs, I've loaded them up with fairly thick twisted coils and so far the wick is keeping up with the coil or is it the other way around?

[Deleted]

I even took my dripper into work today and yup thick cotton wicks work well , very well . I reckon 10 deep long inhales on a dual coil 0.4omh build no dry hits .

Not sure it work in a tank hmmm..

But be warned , changing out such thick cotton can result in seriously mangled coils.

[Deleted]

Sept 22, 2015 20:43:57 GMT @purple1234 said:

I even took my dripper into work today and yup thick cotton wicks work well , very well . I reckon 10 deep long inhales on a dual coil 0.4omh build no dry hits .

Not sure it work in a tank hmmm..

But be warned , changing out such thick cotton can result in seriously mangled coils.

cut wick on 1 side as close to coil as possible and push gently may work best using fine screwdriver

[Deleted]

Sept 22, 2015 20:47:47 GMT @zuza said:

Sept 22, 2015 20:43:57 GMT @purple1234 said:

I even took my dripper into work today and yup thick cotton wicks work well , very well . I reckon 10 deep long inhales on a dual coil 0.4omh build no dry hits .

Not sure it work in a tank hmmm..

But be warned , changing out such thick cotton can result in seriously mangled coils.

cut wick on 1 side as close to coil as possible and push gently may work best using fine screwdriver

Will do that next time , cheers .

[Deleted]

It comes out easier if it is wet.

A few drops of water on the cotton helps it move.

[SteveF]

Sept 22, 2015 20:47:47 GMT @zuza said:

Sept 22, 2015 20:43:57 GMT @purple1234 said:

I even took my dripper into work today and yup thick cotton wicks work well , very well . I reckon 10 deep long inhales on a dual coil 0.4omh build no dry hits .

Not sure it work in a tank hmmm..

But be warned , changing out such thick cotton can result in seriously mangled coils.

cut wick on 1 side as close to coil as possible and push gently may work best using fine screwdriver

I wicked a pair of claptons in my X4 , they had to be wet and cut close to get them out because I cut one side too short .
The wire twists I'm using in the subtank rbas have a combined diameter of 0.9mm and with a couple more turns wouldn't be amiss in a dripper. I don't think they will move as I had to take them out to bend the legs in order to get the coil closer to the deck.
 If you are wondering I figured vaping off the slower ramp up of the thick wire would be better than the fast ramp of a thinner one.

[decoy]

Sept 22, 2015 16:00:52 GMT @zuza said:

Sept 22, 2015 6:49:12 GMT decoy said:

ok im impressed
works ruddy well on the doge

cant wait to try this out left my drippers at mates so it be at weekend seems everywhere i read about it all good things 

gave it  a go in the mini goblin as well but its hard to tell as thats a 0.4mm tc coil i was messing with, ie how much cotton can i get in the coil
but i defo seem to get more clouds higher up the power range

i do wounder why we were not preping these cotton pads the same way for all use,s

i think its time to play with the sub tank rba, just think of the pancakes

[Deleted]

Sept 23, 2015 6:17:20 GMT decoy said:

Sept 22, 2015 16:00:52 GMT @zuza said:

cant wait to try this out left my drippers at mates so it be at weekend seems everywhere i read about it all good things 

gave it  a go in the mini goblin as well but its hard to tell as thats a 0.4mm tc coil i was messing with, ie how much cotton can i get in the coil
but i defo seem to get more clouds higher up the power range

i do wounder why we were not preping these cotton pads the same way for all use,s

i think its time to play with the sub tank rba, just think of the pancakes

Be interested in hearing back re someone wicking a tank using this method

[Deleted]

decoy wow this truelly works picked up my troll built a fast 0.2ohm build
15 inhales nice flavour

reach 20 but was no flavour but still vapour amazing

[phtumshk]

Sept 23, 2015 17:18:43 GMT @purple1234 said:

Sept 23, 2015 6:17:20 GMT decoy said:

gave it  a go in the mini goblin as well but its hard to tell as thats a 0.4mm tc coil i was messing with, ie how much cotton can i get in the coil
but i defo seem to get more clouds higher up the power range

i do wounder why we were not preping these cotton pads the same way for all use,s

i think its time to play with the sub tank rba, just think of the pancakes

Be interested in hearing back re someone wicking a tank using this method

Works great in a taifun.
As the wick half way down the tank when juice gets below it it has a tendency to run dry, but the roll method worked a treat at keeping it moist.

[Deleted]

well i just ordered a new tank think it be on the classies when arrives
mod+dripper seems better in pocket just have to dust off my bum bag
to carry flavours of juice around

[decoy]

Sept 23, 2015 17:18:43 GMT @purple1234 said:

Sept 23, 2015 6:17:20 GMT decoy said:

gave it  a go in the mini goblin as well but its hard to tell as thats a 0.4mm tc coil i was messing with, ie how much cotton can i get in the coil
but i defo seem to get more clouds higher up the power range

i do wounder why we were not preping these cotton pads the same way for all use,s

i think its time to play with the sub tank rba, just think of the pancakes

Be interested in hearing back re someone wicking a tank using this method

daft as it sounds it works well in the mini goblin wich supprised me a ive allways been in the less is more club
ive never perped the cotton pads in this way before and up till now did not like them(funny taste that seems to have gone)
i dont run cotton down any of the juice channels in my attys since gettin the mini fogger(what a little tinker to set up that is till you suss it)