IClear 30S with Provari 3

[paul1]

Hi all 

I'd like some help if at all possible, I've got a Provari P3 with an IClear 30S with a caramel flavoured e liquid, my question is what is the best wattage and voltage for the liquid so I get the throat hit and also the flavour of the liquid as well 

[phatfil]

welcome to aaec paul1..

Im not familiar with your kit so cant offer much help, im sure soemone will be along soon with what u need

[aaront903]

what are the rayios of your liquid?pg/vg and mg,secondly what ohm coil is it?guessing around 1.6?

[paul1]

Ohm of the coil is 1.8 showing 2.0 on the Provari and the mix I think is 80/20 mix

[aaront903]

is that 80 pg as i dont think the iclear will take 80 vg

i personally would be looking around 12-14 watts but slowly take it up till it tastes right,if it tastes burnt drop it down

[paul1]

Yeah I think it's 80 pg what I don't understand is that when I change the watts it's changes the volts and visa versa which seems strange to myself

[aaront903]

yes thats right,watts and volts are the same in a way,think of it driving a car volts is manual and watts is automatic,watts does all the calculations for you making it so you just vape

[paul1]

Anh ok thanks for that it's hard trying to exactly find the right wattage to get the right taste of the liquid might put it on to the Provari mini too see if I can get the right flavour on that any suggestions on too what to try on that device ??

[Greg]

I'd recommend putting the Provari in wattage mode and set it to 8 watts and try it, if that's not enough try 8.2 watts and slowly increase wattage until you get the vape you want.

Those iClears are a little dated so you may not want to push them beyond 10 watts. If you want to higher wattage, say 15 or so you might want to consider a different atty such as a nautilus.

[paul1]

Ok no worries I'll try that other then that I'll see if I can take it to a shop where they know what they are doing only had the tank a day or so and trying to get it right is trial and error I understand that thinking of putting the tank on the Provari mini too see if I can get a better vape from it that way

[Greg]

Oct 22, 2015 20:51:08 GMT paul1 said:

Anh ok thanks for that it's hard trying to exactly find the right wattage to get the right taste of the liquid might put it on to the Provari mini too see if I can get the right flavour on that any suggestions on too what to try on that device ??

It's a little more awkward with the Provari mini as its volts only so a little harder to work out, the principle is the same though. 

If if you set the mini at 3.8 volts that will give you 8 watts with a 1.8 ohm atty attached, try it and if you want more tweak the volts up slowly trying at each step.

[Chrissie]

Hello & welcome paul1

I agree with Greg about trying something different to your iClear. I use an Aerotank on my Provari & get a brilliant draw from it.

[paul1]

It's difficult when your on a limited budget so can't go out and get an aero tank or nautilus just yet wanted to get the cool fire 4 with the tank with the tank through a offer a shop had where I got the tank from but couldn't going to give the mini a go and hope for the best hope it give me a better vape out of interest if I wanted could I wash the coil out and then put a different liquid in it instead of the caramel too see how that goes cause I got told that I can wash it out and then change liquid ?

[Greg]

The mini won't give a better vape than the P3, it will be almost identical I'm afraid.

Your shortfall is the atty not the mod.

[Chrissie]

Yes you can, but if you don't mind vaping through a slight mix, then there is no need to wash the coil.

Where abouts are you? Just wondering if you could get to one of our Vape meets so you could try different things out -

allaboute-cigarettes.proboards.com/board/33/vapefest-uk-meet-ups