Drip tip for iSub Tank?

[doctorjellybean]

I just can't used to the wide mouth piece on the iSub Tank after having used a Protank 2 for ages. Is there anything narrower I can put on top?

[nanotm]

Feb 24, 2016 21:11:43 GMT doctorjellybean said:

I just can't used to the wide mouth piece on the iSub Tank after having used a Protank 2 for ages. Is there anything narrower I can put on top?

just because i'm lazy and had it open anyway

www.amazon.co.uk/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=angled+drip+tip

or if you prefer

www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=510+narrow+drip+tip&_sacat=0


I know some of the results are wider bore still but the majority are not the same,

is it the actual width of the drip tip that's causing you a problem or the airflow rate it gives ?

if the first then if your old tank had a drip tip you liked can you not just use that on it ? I don't know if the itaste had a standard 510 drip tip but the apex looks like it does (I don't have either)

[Perpetua]

They're a standard 510 fitting ( other than the original ) doctorjellybean so you can use any of your drip tips . . . . though I think you'd very possibly get used to the wider bore once the ' newness ' has worn off.

Not dissimilar a feeling when upgrading from an Ego style battery to something larger, soon enough you get used it.

In my experience anyways.

[nanotm]

Feb 24, 2016 22:50:17 GMT Perpetua said:

They're a standard 510 fitting doctorjellybean so you can use any of your drip tips . . . . though I think you'd very possibly get used to the wider bore once the ' newness ' has worn off.

Not dissimilar a feeling when upgrading from an Ego style battery to something larger, soon enough you get used it.

In my experience anyways.

very true, although i must admit that my personal problem was the spitting in the non angled tips, even now i don't like the straight through hot juice in the gob side of wide bore tips so i spent about £30 buying anti spitback ones on ebay, and they work although i have to rinse them several times day and leavethm to air dry (so after getting the first one and finding it worked so well i got a few more for each of the tanks and some drying time spares)


*linked to them in case there any use for anyone else*

[sydsut]

Feb 24, 2016 21:11:43 GMT doctorjellybean said:

I just can't used to the wide mouth piece on the iSub Tank after having used a Protank 2 for ages. Is there anything narrower I can put on top?

The original iSub tank had a fixed Drip-Tip so you can't replace it doctorjellybean , only the G, Apex and S models have replaceable tips.

[doctorjellybean]

Feb 25, 2016 0:05:37 GMT sydsut said:

Feb 24, 2016 21:11:43 GMT doctorjellybean said:

I just can't used to the wide mouth piece on the iSub Tank after having used a Protank 2 for ages. Is there anything narrower I can put on top?

The original iSub tank had a fixed Drip-Tip so you can't replace it doctorjellybean , only the G, Apex and S models have replaceable tips.

Yes, it is the original iSub Tank. Knew I should have ordered one of the others, which I'll do now.

[nanotm]

Feb 25, 2016 9:57:26 GMT doctorjellybean said:

Feb 25, 2016 0:05:37 GMT sydsut said:

The original iSub tank had a fixed Drip-Tip so you can't replace it doctorjellybean , only the G, Apex and S models have replaceable tips.

Yes, it is the original iSub Tank. Knew I should have ordered one of the others, which I'll do now.

well when you get the other version with the removable drip tip if you prefer the angled style drip tips then this might be of interest to you www.gearbest.com/electronic-cigarettes/pp_96883.html

or if your not sure what draw level then perhaps this www.gearbest.com/electronic-cigarettes/pp_96825.html some of them are too thin for a good sub ohm draw but they can all be used for mtl

or there are plastic ones like that (given your original tanks rotatory drip tip) i'm guessing you would prefer something like that which acts like an effective anti spit without the noise of some drip tips (I use a few different tips depending on what tank /juice I'm using although I prefer the bigger diameter one in the first link for decent clouds

[markus]

I just cut a little bit of round S/S mesh & put it in the top of the atty before I put the drip tip on.....seems to work.

[nanotm]

Feb 26, 2016 14:54:23 GMT markus said:

I just cut a little bit of round S/S mesh & put it in the top of the atty before I put the drip tip on.....seems to work.

it does but I find I have to take it out and dry it off a few times an hour to keep the airflow open.... i'm lazy so I don't like that besides its not so easy as take the drip tip off and give it a blow through into the bit of tissue to clear it when your out, maybe its the e-juice i'm vaping or something else that's no optimal but I find there full of juice really fast, of ocurse I like cool vapour so that's probably not helping the situation either, so I just give out links etc basd on whats the simplest options (the tfv4 is the only tank I still use gauze out of choice as it doesn't clog up as fast as the others unless its really cold, and its one of the home only tanks)

[markus]

Feb 26, 2016 22:41:20 GMT nanotm said:

Feb 26, 2016 14:54:23 GMT markus said:

I just cut a little bit of round S/S mesh & put it in the top of the atty before I put the drip tip on.....seems to work.

it does but I find I have to take it out and dry it off a few times an hour to keep the airflow open.... i'm lazy so I don't like that besides its not so easy as take the drip tip off and give it a blow through into the bit of tissue to clear it when your out, maybe its the e-juice i'm vaping or something else that's no optimal but I find there full of juice really fast, of ocurse I like cool vapour so that's probably not helping the situation either, so I just give out links etc basd on whats the simplest options (the tfv4 is the only tank I still use gauze out of choice as it doesn't clog up as fast as the others unless its really cold, and its one of the home only tanks)

Sorry I should have said, I had the same problem at first & I think its because the mesh is so fine, I now use a larger grade mesh that I use for reptile vents, the holes are about 0.5mm