Finally a decent build!

[stressederic]

Fused Clapton with 24guage dual parallel 0.15ohm with awesome flavour! Excuse the messy rx!

[SteveF]

stressederic what kind of wattage are you putting through them?

I reckon I could get one in my Aeronaut, although it will take a fair sized parallel it can get rather warm 70w+

And the fishbone cap looks great, I reckon it will stop any juice making its way past the seals and down to the base

[Bluefish]

I need to get some clapton wire to try on my tsunami, whilst checking wire gauges i came across a thead from ECF from 3 years ago, haha we had no clue back then how this would take off!

[SteveF]

all nichrome, fused 26g/32g c/w 24g reads 0.21ohm,  100w no problem. Not sure if I'd want to fire up a pair though.

[Bluefish]

Do it SteveF that's why ya got 4 posts muhahaha

[SteveF]

single coil atty

[stressederic]

Jun 3, 2016 19:07:15 GMT SteveF said:

stressederic what kind of wattage are you putting through them?

I reckon I could get one in my Aeronaut, although it will take a fair sized parallel it can get rather warm 70w+

And the fishbone cap looks great, I reckon it will stop any juice making its way past the seals and down to the base

Around 90w but will take higher on this build. It is not as hot as you would think and the fishbone cap does seem to be doing a great job. It doesn't get particularly hot and i have not had a leak as yet.

[SteveF]

Jun 4, 2016 11:01:24 GMT stressederic said:

Jun 3, 2016 19:07:15 GMT SteveF said:

stressederic what kind of wattage are you putting through them?

I reckon I could get one in my Aeronaut, although it will take a fair sized parallel it can get rather warm 70w+

And the fishbone cap looks great, I reckon it will stop any juice making its way past the seals and down to the base

Around 90w but will take higher on this build. It is not as hot as you would think and the fishbone cap does seem to be doing a great job. It doesn't get particularly hot and i have not had a leak as yet.

I noticed that it doesn't get as hot as expected, 100w really cuts out ramp up, so a pair must be rocking at 200w in the Tsunami.

[stressederic]

The only problem I am finding in tsunami is getting the wicking to keep up as there is not a lot of space for cotton without blocking the airholes. 150w seems to be the limit without having to redrip after each puff!