Wismec Theorem filling tips?

[tim]

This is a cracking little tank, since I got the hang of it, but has anyone got any decent tips on filling it.

None of my bottle nozzles are long enough to reach the fill hole, and I can't be using droppers or syringes for it.

Best I can do at the moment is fill it really slowly with the tank held at 45 degrees.

Someone surely has a simple solution that I am overlooking?

[Greg]

Don't have the atty but would these work ?

[tim]

Jun 8, 2016 18:32:04 GMT Greg said:

Don't have the atty but would these work ?

Indeed Greg . I'm assuming the fit over a standard nozzle? Where do I get my juice covered mitts on some of those

[faren]

Jun 8, 2016 18:19:43 GMT tim said:

This is a cracking little tank, since I got the hang of it, but has anyone got any decent tips on filling it.

None of my bottle nozzles are long enough to reach the fill hole, and I can't be using droppers or syringes for it.

Best I can do at the moment is fill it really slowly with the tank held at 45 degrees.

Someone surely has a simple solution that I am overlooking?

Unicorn bottle link? I noticed grimmgreen is using a dropper (vid) which seems a little overkill.

The unicorn bottles I have from jv247 have a 3cm nozzle. I'm sure other places sell them with really long nozzles.

[morbidmatty]

I use these 20ml Oval Luer Lock bottle bought nearly 2 years ago and only just found a good reason to use it lol.

[tim]

Jun 8, 2016 18:38:29 GMT faren said:

Jun 8, 2016 18:19:43 GMT tim said:

This is a cracking little tank, since I got the hang of it, but has anyone got any decent tips on filling it.

None of my bottle nozzles are long enough to reach the fill hole, and I can't be using droppers or syringes for it.

Best I can do at the moment is fill it really slowly with the tank held at 45 degrees.

Someone surely has a simple solution that I am overlooking?

Unicorn bottle link? I noticed grimmgreen is using a dropper (vid) which seems a little overkill.

The unicorn bottles I have from jv247 have a 3cm nozzle. I'm sure other places sell them with really long nozzles.

I've considered those, but I'd need to keep decanting from a larger bottle to fill them. I think I may have found the solution now, but thanks.

[tim]

Jun 8, 2016 18:40:00 GMT morbidmatty said:

I use these 20ml Oval Luer Lock bottle bought nearly 2 years ago and only just found a good reason to use it lol.

They look like the ones posted above!!!!

[faren]

Jun 8, 2016 18:42:29 GMT tim said:

Jun 8, 2016 18:38:29 GMT faren said:

Unicorn bottle link? I noticed grimmgreen is using a dropper (vid) which seems a little overkill.

The unicorn bottles I have from jv247 have a 3cm nozzle. I'm sure other places sell them with really long nozzles.

I've considered those, but I'd need to keep decanting from a larger bottle to fill them. I think I may have found the solution now, but thanks.

Ye, they are a PITA to fill.

[joeten]

Would this be of use www.cig-eliquid.co.uk/Spiky_Thing_Spikey_Thing_Refiller/p649230_15948818.aspx

[Greg]

Jun 8, 2016 18:37:39 GMT tim said:

Jun 8, 2016 18:32:04 GMT Greg said:

Don't have the atty but would these work ?

Indeed Greg . I'm assuming the fit over a standard nozzle? Where do I get my juice covered mitts on some of those

Yes they are a push fit on certain standard nozzles, you can get them here 

www.amazon.co.uk/BQLZR-Dispensing-Needle-Tapered-Liquid/dp/B017GS2UEM/ref=sr_1_6?ie=UTF8&qid=1465412469&sr=8-6&keywords=luer+lock+green

[tim]

joeten, I may try these, they look interesting. Cheers.

Greg, thanks very muchly.

Ever reliable on this forum. Best advice on the interweb. Absolutely outstanding service everyone. Many thanks.

[Deleted]

I'm using a syringe and needle. I've got a green nozzle thingy somewhere ....

[ibalders]

Jun 8, 2016 19:30:39 GMT @spikeyfridge said:

I'm using a syringe and needle. I've got a green nozzle thingy somewhere .... thinkingsmiley

Same here a syringe with a 14 Gauge Blunt Needle, and it's what I use to fill most of my tanks :)

[sydsut]

I use patience and let it slowly in just above the hole holding the atty at a 45 degree angle. Works for me but then I'm a Guinness drinker.

[tim]

Jun 8, 2016 19:51:49 GMT sydsut said:

I use patience and let it slowly in just above the hole holding the atty at a 45 degree angle. Works for me but then I'm a Guinness drinker.

This is the method I'm using at the mo Syd, but I'm more a "shot" drinker........ so it don't suit my style. Gonna get a *green thingy* or a Spiky Thing.