ohms jumping

[joeten]

I wonder if one of the mod makers fitted another 510 to it if that would solve it, just a thought.

[tsoko]

Jul 30, 2016 11:02:20 GMT joeten said:

I wonder if one of the mod makers fitted another 510 to it if that would solve it, just a thought.

These are still under warranty so I reckon they should be replaced.

[joeten]

Oh always the first port of call.

[gill2009]

Jul 30, 2016 9:36:58 GMT tsoko said:

Jul 30, 2016 9:27:20 GMT Roscopecotrain said:

I have a similar problem with my MVP 3 Pro. Put any of my Kayfun V4's on it and the ohms jump all over the place. Use any other Kayfun and it is fine and the V4's are fine on other mods.

Strange that, it must be down to the atties then.

  I'm not sure tsoko...I have 3 Cooolfires...& use a fair amount of different atties with no problems...it's a strange one 

[tsoko]

Jul 30, 2016 17:38:29 GMT gill2009 said:

Jul 30, 2016 9:36:58 GMT tsoko said:

Strange that, it must be down to the atties then.

  I'm not sure tsoko ...I have 3 Cooolfires...& use a fair amount of different atties with no problems...it's a strange one 

Are they the Coolfire 4 plus?

[gill2009]

Jul 30, 2016 18:12:16 GMT tsoko said:

Jul 30, 2016 17:38:29 GMT gill2009 said:

  I'm not sure tsoko ...I have 3 Cooolfires...& use a fair amount of different atties with no problems...it's a strange one 

Are they the Coolfire 4 plus?

  Yes 

[tsoko]

Jul 30, 2016 18:21:54 GMT gill2009 said:

Jul 30, 2016 18:12:16 GMT tsoko said:

Are they the Coolfire 4 plus?

  Yes 

Yes this is a strange one, I have emailed Innokin so hopefully they will reply soon.

[Deleted]

if you want a new 510 connection try - this

they come in really handy - not least for connectors made of cheese

[tsoko]

Aug 1, 2016 10:30:20 GMT @johanino said:

if you want a new 510 connection try - this

they come in really handy - not least for connectors made of cheese

I think a tank would look silly on this, do you have a picture of one in use on one of your mods?    

[GunJack]

Aug 1, 2016 17:23:40 GMT tsoko said:

Aug 1, 2016 10:30:20 GMT @johanino said:

if you want a new 510 connection try - this

they come in really handy - not least for connectors made of cheese

I think a tank would look silly on this, do you have a picture of one in use on one of your mods?    

I'll try and pop one up later, but @johanino has a good point - I've got some of these for exactly this purpose (bridging between tank & mod where there's either a poor 510 on the mod or there's a mismatch between the length of the tank 510 and the depth of the mod 510). Using adapters can often extend the life of a mod with an iffy 510

As with any electrical connections, a fraction of a mm can make all the difference between a rock-solid circuit and an intermittent one.... it's not a fault as such, just an incompatability between the mod and tank

[GunJack]

awful pic I know tsoko but you get the idea... don't look daft in use




Mrs.G-J's Kamry with aerotank mega clone, with heatsink/spacer inbetween 'coz it's been dropped a fair bit and the threads on the mod are a bit iffy...the spacer helps no end by not screwing/unscrewing tanks into the mod directly all the time, but into the spacer instead..

[tsoko]

Aug 2, 2016 12:59:35 GMT GunJack said:

awful pic I know tsoko but you get the idea... don't look daft in use




Mrs.G-J's Kamry with aerotank mega clone, with heatsink/spacer inbetween 'coz it's been dropped a fair bit and the threads on the mod are a bit iffy...the spacer helps no end by not screwing/unscrewing tanks into the mod directly all the time, but into the spacer instead..

Thanks for the picture I may invest in some of these.

[dunpuffin]

watch this,guy had same problem with kangertech



hope it helps

[tim]

Aug 2, 2016 16:37:29 GMT dunpuffin said:

watch this,guy had same problem with kangertech



hope it helps

This vid made me smile. The ball bearing he talks about brought back memories of my time in Tenerife showing toots how to coil. She can take those bases apart without any tools.

[toots]

Aug 3, 2016 21:09:00 GMT tim said:

Aug 2, 2016 16:37:29 GMT dunpuffin said:

watch this,guy had same problem with kangertech



hope it helps

This vid made me smile. The ball bearing he talks about brought back memories of my time in Tenerife showing toots how to coil. She can take those bases apart without any tools.

Oh yeah I remember that too tim, never once did I need those tools to open up the base, but my problem was losing the ball bearing!!!! So tiny, we never thought I'd find it ever again, then after hoovering the floor I somehow managed to find it on the floor, we couldn't believe that could we tim It was so tiny even the hoover missed it