PICO Squeeze owners

[thebishman]

Jan 1, 2017 13:10:11 GMT phtumshk said:

Jan 1, 2017 10:57:24 GMT thebishman said:

So then battery geniuses... whats the best battery for battery life for these? 0.6ohm builds. Would i be right in saying the brown lg 3000 mah?

I only use mechs and can get a good 8hours of chain vapin a .7 to .9  builds in my tanks with em.
Steam engine reckons around 350 5 sec toots at 3.7V.
Thats 45 toots an hour for 8 hours.


I normally whip the battery out at around 3.6V as you can tell when there dropping off.
Im not sure how the picos electronics regulates but should be around the same.

Thanks mate. I have easily got a days work out of mine. I can tell by end of day its lagging but it still puts out a good enough vape at the end of that day.

What batteries do you use mate?

[phtumshk]

The brown LGs thebishman
As long as your not into vapin coat hanger wire at 250 watts for £5 a pop you cant beat em.

[thebishman]

Jan 1, 2017 13:51:36 GMT phtumshk said:

The brown LGs thebishman
As long as your not into vapin coat hanger wire at 250 watts for £5 a pop you cant beat em.

Ah thats good. Thats what i have already

You considered a squeeze? They have to the smallest squonker with protection surely!?

[phtumshk]

Jan 1, 2017 13:59:04 GMT thebishman said:

Jan 1, 2017 13:51:36 GMT phtumshk said:

The brown LGs thebishman
As long as your not into vapin coat hanger wire at 250 watts for £5 a pop you cant beat em.

Ah thats good. Thats what i have already

You considered a squeeze? They have to the smallest squonker with protection surely!?

Ive always championed the squeeze over the APV squonks if any body asks for recommendations tho I am a bit biased as a mech user.
That said if I didnt have the luck of making a couple of useable mech squonks Id be all over the squeeze.
But Id probably end up ripping the guts out and turning it into a mosfet mech.
What can i say I like living dangerously lol.

[geordie_vaper]

squeeze is a beast build low and it chucks

[thebishman]

Jan 1, 2017 19:24:03 GMT geordie_vaper said:

squeeze is a beast build low and it chucks

Yep im loving mine. Amazed there isnt a bigger fam base tbh!

[geordie_vaper]

what build you running? in squonk dedicated groups they are really highly thought of i have 3 and planning another hahah!

[thebishman]

Jan 1, 2017 20:00:57 GMT geordie_vaper said:

what build you running? in squonk dedicated groups they are really highly thought of i have 3 and planning another hahah!

Ive got one...and got 2 more on their way. All 3 will be running with the narda rda.

This one is my first build of 26 gauge wire...3mm kanthel coil. Came out at 0.6ohms. Great first build. Battery life is fine too.
Will experiment more with it.

What about you? What rda too

[geordie_vaper]

twisted 26 gauge ss, 9wraps dual coul, 2.5mm id comes out around 0.2.

i use the freakshowv2 and troll v2 modded by mvapes to squonk

[thebishman]

Ah ok...have you experimented and found that to be your fav build?

[geordie_vaper]

ss is great in mechs ramp up is alot quicker then kanthal and bit lower ohms then kanthal

[thebishman]

Jan 1, 2017 20:56:01 GMT geordie_vaper said:

ss is great in mechs ramp up is alot quicker then kanthal and bit lower ohms then kanthal

Ive never tried it tbh... bit you got me thinking now lol

Does it have any different health implications to kanthel?

[geordie_vaper]

just dont dry burn it like kanthal, start it off at low watt pulsing say 10 or 15 watts pulsing for 10 to 15 seconds only till it glows dull red. once wicked and juiced up its fine to crank up the power though

[geordie_vaper]

www.advancedvapesupply.com/pages/316l-coil-wire-instructions

good bit to read and watch if you want to try ss

[thebishman]

Cheer mate. Just had a read. So does kanthal give off "oxides" too??