PICO Squeeze owners

[thebishman]

Just got a new squeeze from @broadblaster

Never used a non regulated, slightly regulated, protected mech mod non mech mod thingy before lol

Ive put a samsung 25r in it. Put a clapton coil in it that comes with it. 0.4ohm its coming out at. Filled the bottle with my home made strawberry n blackcurrent...and its vaping nice!

However...couple of question...

Is the battery right for it?

Any tips tricks i should know about?

If i normally use single coils at 1.5ohm for 20w vaping...how do build it for this type of power etc?

This thing has confused the hell out of me if im honest lol

Thanks

Bish

[Deleted]

Dec 23, 2016 19:28:30 GMT thebishman said:

Just got a new squeeze from @broadblaster

Never used a non regulated, slightly regulated, protected mech mod non mech mod thingy before lol

Ive put a samsung 25r in it. Put a clapton coil in it that comes with it. 0.4ohm its coming out at. Filled the bottle with my home made strawberry n blackcurrent...and its vaping nice!

However...couple of question...

Is the battery right for it?

Any tips tricks i should know about?

If i normally use single coils at 1.5ohm for 20w vaping...how do build it for this type of power etc?

This thing has confused the hell out of me if im honest lol

Thanks

Bish

i forget who it is but i do at least one person on here has a couple of these.

[VapingBad]

You would want 0.6 - 0.8 ohm for 20 W, the 25R will be fine. R = V²/P so at 4 V 16/20=0.8 ohms, at 3.5 V 11.6/20=3.58 ohms.

[thebishman]

Dec 23, 2016 19:35:49 GMT VapingBad said:

You would want 0.6 - 0.8 ohm for 20 W, the 25R will be fine. R = V²/P so at 4 V 16/20=0.8 ohms, at 3.5 V 11.6/20=3.58 ohms.

Thanks jon i think i kinda get that.

So how do i know what would give me good battery life? This clapton 0.4ohm coil wont give good battery life will it. Higher ohms = longer batt life right? I could use 0.3 kanthel at 0.8ohm..would that be better?

[djs]

Hey thebishman are you using the Coral RDA?

It's an odd atomizer, certainly.... but if 20w makes you happy, just go with the numbers as folk have suggested.

What I do know is that it doesn't really vape to the numbers very well. I use RDAs on bigger mods at 28-36w quite often and have not built anything yet on the Coral that can make/match those sorts of clouds.

From what I've tried and what you say, I'd try for 0.5ohms as the max, ideally 0.4.

I wasted a bit of time and wire making two x 0.75 coils and it still lacked some oomph.... (0.37 and still not up and running).

At the moment, it has a single coil Nano RDA on it (16mm Origen clone) and it's a far better vape.... trouble is the frequency of the squonking.

[thebishman]

Dec 23, 2016 19:57:52 GMT djs said:

Hey thebishman are you using the Coral RDA?

It's an odd atomizer, certainly.... but if 20w makes you happy, just go with the numbers as folk have suggested.

What I do know is that it doesn't really vape to the numbers very well. I use RDAs on bigger mods at 28-36w quite often and have not built anything yet on the Coral that can make/match those sorts of clouds.

From what I've tried and what you say, I'd try for 0.5ohms as the max, ideally 0.4.

I wasted a bit of time and wire making two x 0.75 coils and it still lacked some oomph.... (0.37 and still not up and running).

At the moment, it has a single coil Nano RDA on it (16mm Origen clone) and it's a far better vape.... trouble is the frequency of the squonking.

Hi @djs

Yes just thought id try what it came with. Its good...nice vape but it begs for dual coils... (as no single airflow option) not the single ive put in it.

It will take some experimenting im sure...but im mightily impressed! I think this will become really useful set up for work or pub nights etc. So small yet so much juice on tap. I just gotta suss how the battery life thing. Especially as i assume it will reduce power to coil like a normal mech would?

[djs]

Dec 23, 2016 20:10:33 GMT thebishman said:

So small yet so much juice on tap. I just gotta suss how the battery life thing. Especially as i assume it will reduce power to coil like a normal mech would?

Yes and Yes.

I'll have another go later with two coils (on the Coral) trying for 0.7 (or so) per coil.

[thebishman]

Dec 23, 2016 20:18:06 GMT djs said:

Dec 23, 2016 20:10:33 GMT thebishman said:

So small yet so much juice on tap. I just gotta suss how the battery life thing. Especially as i assume it will reduce power to coil like a normal mech would?

Yes and Yes.

I'll have another go later with two coils (on the Coral) trying for 0.7 (or so) per coil.

Ok brill!

[decoy]

the 24 mm tsunami has a nice single coil option and comes with bottom feed pin
www.elementvape.com/tsunami-24-rda-by-geek-vape-two-post-glass-window

[thebishman]

Dec 23, 2016 20:28:17 GMT decoy said:

the 24 mm tsunami has a nice single coil option and comes with bottom feed pin
www.elementvape.com/tsunami-24-rda-by-geek-vape-two-post-glass-window

I have been tempted by one of them. Would be too big for this squeeze though. Once i get my next big squonker i might come back to that.

The narda rda will take some beating though !

[thebishman]

Well...ive just had a play.

I put the following build in the narda. Single coil, 26 gauge 5 wraps 3mm id.

Whacked it on the squeeze and its vaping like a champ!! Fires up nice and quick and the battery is only half charged.

Can someone tell me what the watts will be will a charged battery?

[VapingBad]

If you can tell me the ohms I can, 16 divided by the ohms for a fresh battery, 10 divided by the ohms for a nearly empty one.

[thebishman]

Dec 26, 2016 17:16:43 GMT VapingBad said:

If you can tell me the ohms I can, 16 divided by the ohms for a fresh battery, 10 divided by the ohms for a nearly empty one.

Ah pants i meant to add that jon.. its come out at just under .6 ohms mate

[VapingBad]

About 27 W with a full battery, about 17 W when the battery is nearly empty.

[thebishman]

Thanks jon!!

Im really liking this. I might get another couple of these instead of spending double and more on a big squonker