Any Mech Users/Owners??

[GunJack]

Guys, can you help?? I'm after a switch spring that will suit a Hammer mod, the switch unit looks like the typical "bottom of a tube mech" type, does anyone have a spare or two?

[kermitthefog]

link

quite a varied selection available here

[GunJack]

thanks kermitthefog unfortunately Hammer not listed, and no dimensions on there either

[kermitthefog]

Feb 2, 2017 15:00:46 GMT GunJack said:

thanks kermitthefog unfortunately Hammer not listed, and no dimensions on there either

To be fair bud, there were no dimensions on your wanted post either, I thought you might be able to tell which you needed from the various images, I have several mechs but they are all different. sorry it wasn't of any use but they are all tube mech relacements

[kermitthefog]

Having done a bit of research the hammer is M21X1 threaded so springs from any of these should be ok
APV Atom.
Kamry K100.
Kato Astro.
Madz Modz Nzonic (V3, V5).
Mojo Chi You.
Surefire Vapors King.
Team Rampage Ba gua.
Vape L.A. Oni.

[Q]

Would it be possible to convert it to magnets?

[phtumshk]

heres a size guide for magnets as suggested by Q
I would presume there geared at the originals so sizes may or may not suit a clone.

There were 2 different options for the hammer.
9.5x6.35x1 (wouldve thought that would be a typo and mean 9.5x6.5 ?)


7x5x1

If your button looks like either of those head over to ebay or amazon theres always loads of ring magnets plenty cheap if you know the sizes.

[GunJack]

Thanks for the steer guys, will have to get the micrometer out and measure it...

[enjay]

Make one out of 20G nichrome to get the size, also works in a mech but yeh, good way to get the sort of size figured out.