Is there...

[SteveF]

.. taller single coil B/F rda?

I'm used to my Aeronauts and although the Hadaly is a great little atomizer I'd like a bit more distance from beefier coils.

If there isn't I am considering converting an Aeronaut to B/F, should be able to get a 3mm thread in the base of the positive post providing a good stainless pin is available.

[beedee]

To get some distance I use 510 heat sinks like these.

I've also got a few longer drip tips

Many of the velocity drippers are taller and have squonking pins, and so does the Maze RDA. I've done singles on these, using a transverse coil on the velocity and by blocking off the spare holes in the Maze.  Like the sound of a converted aeronaut.

[Get Off My Cloud]

Aeronaut V2 comes with a squonking pin.

[SteveF]

beedee I have tried longer DTs with a few different bore sizes but I didn't stick long with the ultra short atomisers I tried before. And dual coilers in single coil use just don't do it for me.

to be honest Get Off My Cloud I don't really want a V2 Aeronaut even though it looks like the only option.

[Get Off My Cloud]

Apr 5, 2017 4:17:02 GMT SteveF said:

beedee I have tried longer DTs with a few different bore sizes but I didn't stick long with the ultra short atomisers I tried before. And dual coilers in single coil use just don't do it for me.

to be honest Get Off My Cloud I don't really want a V2 Aeronaut even though it looks like the only option.

Yeah i can't think of any other single coil atties that are tall, the Tsunami is about the same height as the V1 Aeronaut but that's a dual coil atty that has the option of blocking off one side.

[phtumshk]

If you can get a 3mm pin in it you could get away with putting a saw cut down it.
Done a few others like that and it works well.
I say if you can cos Im sure the aeronaut has a blind bush in the 510 and screws together from inside the well?.

[beedee]

Apr 5, 2017 4:17:02 GMT SteveF said:

beedee I have tried longer DTs with a few different bore sizes but I didn't stick long with the ultra short atomisers I tried before. And dual coilers in single coil use just don't do it for me.

to be honest Get Off My Cloud I don't really want a V2 Aeronaut even though it looks like the only option.

Can see where your coming from, stevef, though the velocity is pretty good with a single coil positioned with the airflow going over the top of, it does not match, for me anyway, a dedicated single coil with the airflow coming from below the coil. 

Hope you find find what your looking for   If you do, tell us about it!

[SteveF]

Apr 5, 2017 10:34:34 GMT phtumshk said:

If you can get a 3mm pin in it you could get away with putting a saw cut down it.
Done a few others like that and it works well.
I say if you can cos Im sure the aeronaut has a blind bush in the 510 and screws together from inside the well?.

I'm thinking of tapping the positive, but if I could get along enough pin and a 3mm nut and a I suppose  drilling it out and top fixing could be an option as the standard pin is threaded and is fixed by a hex head screw from the top.

[paulbee]

You can put a vertical coil between the posts on a Velocity or Tsunami

[paulbee]

If you Google vertical coil velocity and look at the images it'll show you what I mean

[b1mble]

I have an Inoy clone that is very long - even longer after I stuffed a Stingray drip tip into the chuff cap.

[SteveF]

Apr 5, 2017 23:14:54 GMT paulbee said:

If you Google vertical coil velocity and look at the images it'll show you what I mean

cheers, I know what you means , I find that the top of the wick gets a touch dry. Also had a few goes at dual vertical in my aramamiser.....same problem, too hot at the top.

[paulbee]

Apr 6, 2017 17:29:16 GMT b1mble said:

I have an Inoy clone that is very long - even longer after I stuffed a Stingray drip tip into the chuff cap.

Proper rocket that one!

[SteveF]

Apr 6, 2017 17:29:16 GMT b1mble said:

I have an Inoy clone that is very long - even longer after I stuffed a Stingray drip tip into the chuff cap.

Hmmm, thats a possible, at least it would mean that the mod isn't in my face