Please note, any banner ads that you see at the top & bottom of the forum are placed there, not by us, but by our host Proboards. Therefore neither the items advertised, or the vendors, are endorsed by this forum.
One of the things i tend to forget these days - as my selection is a tad more limited than it used to be - is how a particular aty can be Meh with one mod and yet work wonderfully with another. In the 'old days', on 'Ye Olde' UKV, when i'd do a text review i'd try the new aty with different mods and give recommendations about what it might work best with. But i was spending £50-100+ on new devices every month to play with.
For the last 3-4 years - i've been in 'travelling light' mode - and had to settle more for what is available and practical.
Anyway, having temporarily 'misplaced' me Smok Alien and OBS Engine Nano at a friends (since 're-discovered and in transit back to me), i only had my fall back device of the Sinuous P80 and a Cubis tank to vape on (0.5Ohm SS coil). TBH - whilst just about adequate to vape on - i was a tad underwhelmed. Not just because of the obvious difference in Vapour Production, but the whole 'Shape of the Vape' and enjoyment factors. But muddled through for the required 10 days until i got back to Ireland and my Vape Stash.
Once back, i popped the Cubis on my old and battered Pico - and Wow - what a difference a Mod Makes!
Same head/coil, same juice and (apparently) the same W's - but the 'Shape of the Vape' turned from Meh to Mmmm!
Now this might not be the case for every tank/aty available - but you might be surprised that what doesn't work with one mod - might be preferable on another (and vice versa)
Good advertising blurb for mod manufacturers. Impossible to be fact though. A mod simply delivers power to the atomiser. Your pico is clearly seeing the atty differently, and you are getting more power delivered. Few of them are accurate. One mod reads different ohms to another.