For anyone who fancies a go at building a squonker.

[macmagoo]

You can ask Sledz to do the 3D printing at a higher resolution giving you a better finish but it costs extra.

[striker42]

Oct 27, 2017 21:50:13 GMT macmagoo said:

You can ask Sledz to do the 3D printing at a higher resolution giving you a better finish but it costs extra.

I think that will come in the future. If the quality was a bit better and the price increase was reasonable, I'm sure they'd still sell them easily. I'm going to order an alumide box when he does the next run of them.

[macmagoo]

I ordered an Floris Mini Orca box today, more expensive than the Sledz boxes but it is delrin. I have all the bits to put a mech Squonker together. Total cost for my mech squonker will be £55.

[macmagoo]

Oct 27, 2017 23:08:59 GMT striker42 said:

Oct 27, 2017 21:50:13 GMT macmagoo said:

You can ask Sledz to do the 3D printing at a higher resolution giving you a better finish but it costs extra.

I think that will come in the future. If the quality was a bit better and the price increase was reasonable, I'm sure they'd still sell them easily. I'm going to order an alumide box when he does the next run of them.

Sledz was supposed to be taking orders for the Alumide boxes this week again but it has not happened.

[striker42]

All put together and working perfectly. Due to the materials not turning up for the positive battery connector, I had a rummage throught junk box and found a bit of chineseium that works, although this will be swapped when the brass strips turn up. Not much to say really other than the 22mm washer for the 510 would not fit properly. Five minutes with a spongy sanding block round the outside of the washer and it sits in perfectly. There are imperfections with the print, but it ain't a £100 + box, so for the £12 paid, I'm happy with it.
For anyone who would like something in their vape collection that was put together with their own hands, it doesn't get any easier than this. ghostrider1971 , you would manage this no problem.







Seven wrap 0.5mm, Ni80, 0.38ohm coil firing nicely.

[ghostrider1971]

striker42 - That looks absolutely fabulous

[thebishman]

Nice work striker42...didnt take you long!!

[striker42]

Oct 29, 2017 16:53:20 GMT thebishman said:

Nice work striker42...didnt take you long!!

Impatience is my strong point.

[thebishman]

Oct 29, 2017 17:08:48 GMT striker42 said:

Oct 29, 2017 16:53:20 GMT thebishman said:

Nice work striker42...didnt take you long!!

Impatience is my strong point.

Lol you and me both.

[Edge]

Oct 29, 2017 12:45:47 GMT striker42 said:

All put together and working perfectly. Due to the materials not turning up for the positive battery connector, I had a rummage throught junk box and found a bit of chineseium that works, although this will be swapped when the brass strips turn up. Not much to say really other than the 22mm washer for the 510 would not fit properly. Five minutes with a spongy sanding block round the outside of the washer and it sits in perfectly. There are imperfections with the print, but it ain't a £100 + box, so for the £12 paid, I'm happy with it.
For anyone who would like something in their vape collection that was put together with their own hands, it doesn't get any easier than this. ghostrider1971 , you would manage this no problem.







Seven wrap 0.5mm, Ni80, 0.38ohm coil firing nicely.

Mod looks very nice, but why are you vapeing on fairy liquid?

[striker42]

Oct 29, 2017 17:17:14 GMT Edge said:

Oct 29, 2017 12:45:47 GMT striker42 said:

All put together and working perfectly. Due to the materials not turning up for the positive battery connector, I had a rummage throught junk box and found a bit of chineseium that works, although this will be swapped when the brass strips turn up. Not much to say really other than the 22mm washer for the 510 would not fit properly. Five minutes with a spongy sanding block round the outside of the washer and it sits in perfectly. There are imperfections with the print, but it ain't a £100 + box, so for the £12 paid, I'm happy with it.
For anyone who would like something in their vape collection that was put together with their own hands, it doesn't get any easier than this. ghostrider1971 , you would manage this no problem.







Seven wrap 0.5mm, Ni80, 0.38ohm coil firing nicely.

Mod looks very nice, but why are you vapeing on fairy liquid?

Coz it's awesome, I'm a bubbly type of guy and it keeps my coils clean.

[Edge]

Oct 29, 2017 17:22:34 GMT striker42 said:

Oct 29, 2017 17:17:14 GMT Edge said:

Mod looks very nice, but why are you vapeing on fairy liquid?

Coz it's awesome, I'm a bubbly type of guy and it keeps my coils clean.

Self cleaning wicks and coils, you Sir are a genius

[striker42]

Oct 29, 2017 18:06:58 GMT Edge said:

Oct 29, 2017 17:22:34 GMT striker42 said:

Coz it's awesome, I'm a bubbly type of guy and it keeps my coils clean.

Self cleaning wicks and coils, you Sir are a genius

Another title. Thank you.

[phtumshk]

Well done fella.

[macmagoo]

He is vaping the Green Stuff