For anyone who fancies a go at building a squonker.

[gill2009]

Oct 29, 2017 19:21:06 GMT macmagoo said:

He is vaping the Green Stuff

  & I know what it is ...& I think it's yeugh as Graham knows 

[DaveJ]

Oct 29, 2017 12:45:47 GMT striker42 said:

All put together and working perfectly. ....




...

I do not see a hammer nor lots of broken plastic parts. However I do see a decent looking mod making vapor. I'd count that a success. A plus.


Iffn it only had some sort of regulation board and a second battery in lieu of that juice bottle I'd be all over those!

Well done.

[macmagoo]

Oct 29, 2017 20:23:10 GMT gill2009 said:

Oct 29, 2017 19:21:06 GMT macmagoo said:

He is vaping the Green Stuff

  & I know what it is ...& I think it's yeugh as Graham knows 

Graham sent me some and I've been vaping it everyday, lovely.

[VapingBad]

Graham green fairy .... new title

(good job there are about 400 mile between us, don't do it mods or I'll have to go into witness witless protection)

[striker42]

Oct 31, 2017 0:14:30 GMT VapingBad said:

Graham green fairy .... new title

(good job there are about 400 mile between us, don't do it mods or I'll have to go into witness witless protection)

We'll discuss this suggestion over some Malt in 2018 🤔🤔

[taffevans]

Good to see folk making their own squonk mods...Like has been said here, its not hard to do, get a decent enclosure and you can get all the bits you need from Modmkers..
This is a Floris Orca box i put together a while back, using modmaker parts, took about an hour or so all told, simple to do and very worthwhile. There is something about vaping on a mod you made...

[thebishman]

Well, here is my first attempt at building (putting  together) a mech squonker. Atlast!!!!
















Hits hard too...well impressed!

[striker42]

Very very nice thebishman and a good bit of fun for a few pounds. Copper internals ? Bet you're studying the colours for your next one. LOL.

[thebishman]

Nov 12, 2017 13:58:46 GMT striker42 said:

Very very nice thebishman and a good bit of fun for a few pounds. Copper internals ? Bet you're studying the colours for your next one. LOL.

Cheers mate! Managed to do it all with a multi-tool lol had to sand the button down to make it loose enough. Did you have to do that?

Not gonna lie...i do want to build another one. But i might wait for the alumide box enclosure

[striker42]

Yep, the buttons were too tight on both the boxes I got, but I went the other way and used a fine file on the button cut out o the box to make it fit properly. The squonk door is very tight fitting too and doesn't need the magnets fitted to hold it in place, although after a bit of use, I think they will have to be fitted as the plastic will probably wear through time. And yes, I will definitely be having a crack at an alumide box if I can manage to get one. I have noticed that the 20700 boxes have been removed from the website, not sure what the story is with them as I was to have a replacement sent. Will give it another week or so and see if anything turns up, if not, I'll get in touch with Sleds and find out what the situation is.

[thebishman]

Nov 12, 2017 14:50:58 GMT striker42 said:

Yep, the buttons were too tight on both the boxes I got, but I went the other way and used a fine file on the button cut out o the box to make it fit properly. The squonk door is very tight fitting too and doesn't need the magnets fitted to hold it in place, although after a bit of use, I think they will have to be fitted as the plastic will probably wear through time. And yes, I will definitely be having a crack at an alumide box if I can manage to get one. I have noticed that the 20700 boxes have been removed from the website, not sure what the story is with them as I was to have a replacement sent. Will give it another week or so and see if anything turns up, if not, I'll get in touch with Sleds and find out what the situation is.

I gad emailed them. They were great at replying. Very helpful and polite.

I asked about the alumide and he said he is up'ing production of them as they are so popular

[DaveJ]

Nov 12, 2017 13:43:13 GMT thebishman said:

Well, here is my first attempt at building (putting  together) a mech squonker. Atlast!!!!





Hits hard too...well impressed!

Good for you!

It looks decent and it makes vape, what more do you need? Well done!

[thebishman]

Nov 13, 2017 6:36:04 GMT DaveJ said:

Nov 12, 2017 13:43:13 GMT thebishman said:

Well, here is my first attempt at building (putting  together) a mech squonker. Atlast!!!!





Hits hard too...well impressed!

Good for you!

It looks decent and it makes vape, what more do you need? Well done!

Cheers mate!