Kanger Subtank RBA V2

[happyloman]

Hello
IVe been happily vaping away for over a year now with my Kanger Subtank and never really use anything else these days.
The screw in the RBA has started to stop screwing in and so Ive been looking for a replacement RBA.
IVe tried Amazon, Gearbest and Fasttech, all of them stated they had the V2, or at least showed a picture of one in the profile and all of them have sent me the V1 version with the tiny holes
The screws for them seem to be a different size to the V2 screws too, so I cant even swap.

Does anyone know anywhere that stocks the V2?

The V1 is the one on the left of my picture, got about 8 of these now lol.

[Get Off My Cloud]

Those aren't V1 they're some kind of clone of the V2, the V1 didn't have holes in the side of the barrel section it had channels cut into the deck section.

MyEpack have the V2 in stock and you'll at least know it's authentic.
myepack.co.uk/accessories/kanger/kanger-mini-rba-plus.html

Alternatively if you have a drill or know someone with one just drill out the holes on the ones you bought larger.

[happyloman]

Really they are fakes? I was sure the original RBAs came with these tiny holes and the V2 was the new version

Will give myepack a try, thanks for advice

[phtumshk]

There some on ebay for six squid.

[Get Off My Cloud]

Nov 8, 2017 21:12:24 GMT happyloman said:

Really they are fakes? I was sure the original RBAs came with these tiny holes and the V2 was the new version

Will give myepack a try, thanks for advice

These are the V1 see the little channel cut in the base?



V2 on the left, V1 on the right.

[decoy]

dismantle them and drill the holes out to around 3mm
if you really dont fancy doing it yourself post them to me and ill do it for you
the mk1 had small v,s cut into the base for wicking and no screw on the side
that do look like a mk2 and i had one supplied with the all in one kanger mod thing that had the same small holes so it could genuine
its also worth opening up the holes on the centerpin to let more aair throw if you going for more than 30 watts

[decoy]

Nov 8, 2017 21:21:12 GMT phtumshk said:

There some on ebay for six squid.

they are for the plus and dont fit the normal one as i found out lol

[happyloman]

Cheers all Off to the garden shed on Saturday lol ;p

[bratz]

Smaller hole are version 3 which came with the Toptanks. I have all 3 version. For mtl , enlarging the hole isnt required for me.

[decoy]

Nov 9, 2017 10:29:52 GMT happyloman said:

Cheers all Off to the garden shed on Saturday lol ;p

not being funny but clamp the tube your going to drill in a vice or some mole grips,do not try to hold it with your fingers and drill it as it dont end well 
well it didnt for me 

another good tip is drill from one side to do one hole then turn it over and drill the hole on the other side from the out side as well 
trying to drill all the way throw in one go didn't end well for me either 


hope that helps you keep all yer fingers 

[dave]

Another drilling tip I discovered the hard way (!) is to screw the top on before you put it in the vice for drilling - the sides don't get squashed in that way.

[decoy]

Nov 10, 2017 17:53:43 GMT dave said:

Another drilling tip I discovered the hard way (!) is to screw the top on before you put it in the vice for drilling - the sides don't get squashed in that way.

or clamp it at the round ends

[colli]

pm me your address i am sure i have a few of these that can wing there way to u for free