Here is a weird one...

[beedee]

Bottom feeder for mech.




This is is an odd one - anyone tempted? 

[VapingBad]

I think they missed a trick making it only compatible with tube mods, if it were able to fit box mods it would be a cheap way for people to try squonking with their favourite board. Also 24 mm not 22 mm, strange.

[phtumshk]

Would look pretty good matched up to an 18500 mod if it wasnt for the (IMO) big ass gap between the mod and bottle bit and being 24mm.

There over on FT also for around £5.
Worth a £5 for the novelty value.

PS you wouldnt want to be screwin it onto a hybrid with that flush pin.
Stay safe kids.

[lush]

Found a rda to fit my 26650 squonk box! Sherman RDA in squonk mood. bugger wrong post sorry peeps

[lush]

Aleader Box Killer 80W, had to do install a 7mm x 1mm oring in the 510 to stop it leaking also had to file out the door window! wasn`t true on the bottle! apart from that nice little mod feels rubbery in the hand  sorry wrong post sorry peeps

[beedee]

Nov 19, 2017 2:10:27 GMT phtumshk said:

Would look pretty good matched up to an 18500 mod if it wasnt for the (IMO) big ass gap between the mod and bottle bit and being 24mm.

There over on FT also for around £5.
Worth a £5 for the novelty value.

PS you wouldnt want to be screwin it onto a hybrid with that flush pin.
Stay safe kids.

I think so too, I have a few mechs I can try it on, or it might even suit my old VW Clouper, so it’s in da basket for me!    Shinyitus strikes again!

[dalealan]

Shame there's a ridge so it would stop you screwing it onto a box mod unless you used one of those heat sinks as it looks like it'd fit on the concave bit of our C2D1s VapingBad I'd have gave it a whirl for a fiver.

[yourgurnard]

Ditto the comments made re. not fitting box mods & being 24mm!!
I'd luv one for My 30w I-stick!

[beedee]

Got mine today yourgurnard . dalealan , lush , phtumshk , VapingBad .

A fail for me so not recommended - the lower part of the squonk bottle section is slide on, so is only held by O-rings - the sleeve is not long enough so, when trying to squonk, it pulls the section inward, this is carefully disguised in the video, you probably could use it if you were very careful, but mine has gone straight in the draw!

[phtumshk]

Dec 9, 2017 15:35:06 GMT beedee said:

Got mine today yourgurnard . dalealan , lush , phtumshk , VapingBad .

A fail for me so not recommended - the lower part of the squonk bottle section is slide on, so is only held by O-rings - the sleeve is not long enough so, when trying to squonk, it pulls the section inward, this is carefully disguised in the video, you probably could use it if you were very careful, but mine has gone straight in the draw!

Ah Bugger.
Thanks for taking  1 for the team.