Innokin Cool Fire 1v TC100

[jamesrd]

I have the above E-cig and it has me baffled, I press the on light and it flashes blue but nothing else works, I've only had it a few months, has anyone any ideas what's wrong with it, I would really appreciate it if you could help THANK YOU. Jamesrd

[joeten]

There are tips here www.electronic-cigarettesco.co.uk/content/44-e-cig-battery-problems hope 1 of them helps.

[MrDJ]

blue?
not heard of that before as mine only goes green, yellow, red.

does 3 clicks turn it off/on and flash the above colours or is it just blue and thats it.

[marksixysix]

There should be no blue light on a coolfire.
I have had my fair share of them and only Green Yellow Red for the button.

Maybe something has shorted inside and is illuminating the Green and yellow at the same time to produce the blue light.

Manual states nothing about a blue led on the mod either.

Sounds like it's buggered so I guess the obvious question is how long have you had it and is it genuine?

[jamesrd]

Hi Mark, I'm afraid I am colour blind at times, it is green not blue, 'sorry' I've only had about 6 months, what's wrong with it I just don't know, I have a 80 year old brain, anything technical these days baffles me, do you think it's just something simple , could you fix it Mark? if so let me know, if not I might as fling it, thanks Jamesrd

[MrDJ]

that makes more sence then.

green means fully charged and when you press the button it does go green and then you inhale.
if it is flassing then once again i have no idea.
what settings have you got it on?
im guessing it should be wattage and in middle of screen mine shows 43.5W

so next
what tank and which coil ohm are you using. maybe its a TC coil and the mod is set to wrong setting. just a guess.

[marksixysix]

As MrDJ says then,

Check your settings, and wattage is high enough.

Try another tank on the mod as well as you could have a duff coil, check the threads of the 510 of the mod and wipe clean if dirty and also on your tank as well.

If the switch is lighting green but not firing, it could be a problem with the switch or the board itself.