Please note, any banner ads that you see at the top & bottom of the forum are placed there, not by us, but by our host Proboards. Therefore neither the items advertised, or the vendors, are endorsed by this forum.
I have been trying to locate something to make it easier to fill my DCT tank. I have been looking at the Siam mods type white plastic tank filler which you fix on the end of the carto and pull into the tank.
I also was watching a video instruction showing how to fill a tank and this guy had a small bellow/syringe type thing with a small flexible hose which was inserted into the tank and then filled. This looked a very easy way to fill up but I cant find the video again. If anyone has something similar and can point me in the right direction to a retailer this would be much appreciated.
i just pop the carto down a bit and top up staright from the bottle on an angle then straighten toward the end like pouring a pint. the just carries on flowing down the side right to about 2 mm from the top
Take the top section off the DCT tank , fill down the side of the carto , when you replace the top of the DCT tank wipe a bit of juice on the "o" ring and replace it , when you push it home it will force juice into the carto , so remove carto from device if you haven't already done so make sure drip tip is in place and give a quick blow to remove any excess.
Please note, any banner ads that you see at the top & bottom of the forum are placed there by our hosts, Proboards. Therefore the items advertised are not endorsed by the forum.