Vision Cleaning

[chrisjw]

Having a silly hour, washing, rinsing & then dry burning all my visions........Not getting the normal hit, seem to be drawing harder & am getting a burning taste with a couple of them, particularly on Edith & Edna...........Just thought I'd share that riveting news with you ..............

[gaz0012]

Always let my dry out for 24hours before re using,i just fill my visions with hot water let stand for an hour then dry out once ive took all the bits apart.

[Annie]

[Sandra (aka Chillax)]

I dont even wait for them to dry, just shake till no more water comes out, re-fill, slosh about, and vape, the first few vapes are naff but it soon comes back Chris.

[chrisjw]

Jul 26, 2012 9:47:10 GMT gaz0012 said:

Always let my dry out for 24hours before re using,i just fill my visions with hot water let stand for an hour then dry out once ive took all the bits apart.

I read somewhere on here, that with the aid of tweezers, you can pull the silicone cap off the vision 2's ( non-rebuildable jobbies ), or is it not worth the effort?

[ciar]

in the v3's i clean then dry with kitchen roll, making sure to dry the wicks as best as i can, dry burn and then use, in all honesty all of them are still working as intended ;-)

[Ellen]

Jul 26, 2012 10:54:15 GMT chrisjw said:

Jul 26, 2012 9:47:10 GMT gaz0012 said:

Always let my dry out for 24hours before re using,i just fill my visions with hot water let stand for an hour then dry out once ive took all the bits apart.

I read somewhere on here, that with the aid of tweezers, you can pull the silicone cap off the vision 2's ( non-rebuildable jobbies ), or is it not worth the effort?

I didn't bother with mine and they were fine, then when I tried without tweezers, using various implements it didnt go so well for me...I knackered it

[Malibu]

I just leave them all ( rebuildable or non rebuldable ) on kitchen towel for the night, I just use another 1 or 2 while they are drying.

[2risky]

I use small forceps rather than tweezers to get a decent grip, it's reasonably easy to get the cap through the top hole that way.

Mostly for quick rinsing I just use the Sandra method above, but for dry burns I remove the cap. But I'm moving on to V3 rebuildable Visions soon, which should allow for more thorough servicing.

[jamila169]

I've just got V3's, it's great being able to get at everything vaping like good 'uns on my rok star batteries (yes, i know ) at 2.8, might try going lower seeing as I've got them

[maccafan]

Bring them along with you when you come to my house chris and I'll show you how to restore them..