Recent Posts

What is most popular in 2013? Contrast- color!! New Sentinel Mod will give you a colorful summer !!

About Kmax?
Name Kmax
body color Chrome & black chrome
tube color chrome, red, green, black,gold
battery 18650, 18350, 18500
fit for 510/ego thread atomizers
variable voltage 3.0v – 6.0v
variable wattage 3.0w – 15w

Kmax description?
1. Kmax can work with 1pc 18350, 18650, 18500 or 2pcs 18350 batteries.

2.variable voltage 3.0v-6.0v
variable wattage 3.0w-15w

3.Kmax can test the resistance of the atomizer as well

4.both the display and system can be locked

5.the top ring is removeable , so our Kmax can fit all the 510/ego thread atomizers

6.Hidden display, only 1 button, make the Kmax looks very nice and luxury

7.Display functionality. It can display the battery voltage,output voltage, atomizer impedance and output power.

Kmax specification?
*Charging and Power Supply:

1. Standard capacity: shared single and double Lithium-Ion batteries;
the peak allowable input is 9V; When the input voltage is too high, the screen shows HHH.

2.Charging method to the battery: remove the battery, and use the external battery charger.

*Working Parameter:

1.Standard load is 3 ? (ohm). Available to work in a 1.5 ?(ohm) load system. (1.5~3.0ohm)

2. Quiescent current: less than 50uA.

3. It has the output function of the constant voltage and the constant power, the output
voltage is positive and negative 0.2V.

*Basic Functions:

1. Electrified reset: Enter the standby mode after nixie tubes display 123456789.

2. Time-limited protection function: Once the time of Inhaling a puff of smoke
is longer than 10 seconds, it forces a shutdown of output.

3. When one take a puff after the single-battery voltage is lower than 3.3V or after
the double-batteries voltage is lower than 6.5V, the screen will show the characters
—LoU as a reminder of charging up the battery, the voltage is prohibited from output
for the time being.

4. The normal kind of smoking displays corresponding informations on nixie tubes under
the screen-on mode, it dims under screen-off mode.

Product Performance:
1.Output under the dual mode of constant voltage and constant power.
The output voltage under the mode of constant voltage is from 3V to 6V, which is switchable. It has a margin of error of plus or minus 0.2V.

The input power under the mode of constant power is from 3W to15W. The automatic matching of the atomizer impedance can achieve a consistent output of smoke volume.

2. A single button operation has 25 powers for selection and 36 voltage switchable.

3. The measuring function of atomizer resistor can test the actual impedance of the atomizer.

4. Display functionality. It can display the battery voltage,output voltage, atomizer impedance and output power.

5. Protective function for the reverse connection of battery. When the positive and negative terminals of the battery is reverse, the automatic protection comes into play without damaging any component or battery.

6.The function of low voltage alarm.When the voltage is lower than that of the setting voltage, the prompt suggests that the voltage is too low so as to protect the efficacy of battery
Kmax advantage and strength?
1. Telescope mod, can be short or long as you like. So in order
to connect the battery, just screw to adjust the length of the body,
2. 3 kinds of battery can be worked with——18650, 18350, 18500
3. Five colors colors of LED tube for you to choose—— chrome, red, green black and gold.
4. 7 systems, can show the voltage, wattage, resistance, ...etc.
5. Hidden display, the LED screen can be hided when it is not
working.
6. Removeable top/bottom ring. The top and the buttom cap can be took off when you are changing atomizers and batteries.
7. The top ring can be take off, make the Kmax can fit all the 510/ego thread atomizer
8. Time-limited protection function: once the time of Inhaling a puff of smoke is longer than 10 seconds, it forces a shutdown of output.
9. Different bottom cap.
Compared with Zmax
1. The screen is bgger.
2. The body can dissipate heat.
3. Variable color for tube.
4. The measurement is more accurate.
5. The line is thicker.
6. The bottom can be explosion proof.
7. The top is the FC (not easy to broke) not silicone.
8. The PCB is not same with smoke,
9. It’s default RMS.
Prompt for action:
1. Mode-setting: Enter and set the mode by continuously pressing the button 3 times in 2 seconds. Exit mode-setting automatically if no button pressed within 2 seconds.

2. Increment-settings: Under the setting mode, select“1.Uu/1.Pu”by pressing button which is an option for increasing the output voltage or power; Stop pressing button once there is “1.Uu/1.Pu” displayed on nixie tubes, then wait for 2 seconds and the current output voltage or power will be showed on the screen of nixie tubes. At this point, the user can press the button to increase the values. After finishing the settings, the system automatically exits the setting mode if no button pressed within 2 seconds. The output voltage under the mode of voltage is 3.0V-6.0V in increasing order, while the The power under the mode of power is 3.0W-15W. After reaching the maximum, the value will switch to the minimum in loops. With a long press, the voltage or the power will be automatically added.

3. Decrement-settings: Under the setting mode, select “2.Ud/2.Pd” by pressing button which is an option for decreasing the output voltage or power; Stop pressing button after there is “2.Ud/2.Pu” displayed on nixie tubes, then wait for 2 seconds and the current output voltage or power will be showed on the screen of nixie tubes. At this point, the user can press the button to decrease the values. After finishing the settings, the system automatically exits the setting mode if no button pressed within 2 seconds. The output voltage under the mode of voltage is 3.0V-6.0V in decreasing order, while the The power under the mode of power is 15.0W-3W. After reaching the minimum, the value will switch to the maximum in loops. With a long press the voltage or the power will be automatically decreased.

4. Locking/unlocking: Under the setting mode, select “3.So” by pressing button, then waiting for 2 seconds, the screen of nixie tubes will show you to determine whether to lock or not presently . Here one can press the button to choose locked mode “S.oF” or unlocked mode “S.on”. After that, the system automatically exits the setting mode if no button pressed within 2 seconds. At the status of locked mode “S.oF”, there is “———” displayed on nixie tubes without smoke output.

5. Battery Test: Under the adjustment mode, select “4.Uc” by pressing button, after waiting for 2 seconds, the nixie tubes shows the current voltage. The system automatically exits the setting mode if no button pressed within 2 seconds.

6. Battery Test: Under the adjustment mode, select “5.dS” by pressing button. After waiting for 2 seconds, “do/du/dR”can be selected.
“do”: It displays the output voltage information of the atomizer.
“du”: It displays the voltage information of the battery.
“dR”: It displays the resistance information of the resistor heating wire.
After that, the system automatically exits the setting mode if no button pressed within 2 seconds.
7. The indication of nixie tubes: Under the setting mode, select “6.Lo” by pressing button, after waiting for 2 seconds, the option of “L.on/L.oF” is given to choose.
“L.on”: the indicator lamp of nixie tubes lights to indicate when smoking.
“L.oF”: the indicator lamp of nixie tubes doesn’t light to indicate when smoking.

8. The mode switching of output constant voltage/constant power: Under the setting mode, select “7.UP” by pressing button. After waiting for 2 seconds, enter the switching interface of constant voltage and constant power. “Po” refers to the mode of constant power, while “Uo”refers to the mode of constant voltage. After choosing the options, the system automatically exits the setting mode if no button pressed within 2 seconds.

9. It shows “F1” if a short circuit happens; It shows “F2” if the output resistance is lower than 1.2 ?(ohm).

10. When the voltage is above 9V, the screen shows HHH.

11. If the single-battery voltage is lower than 3.3V, or the double-batteries voltage is less than 6.0V, it shows “LoU”.

Dispatch within 24 hours!!!

100% Stainless Steel, no wire solder , no welding.
DS Stainless Steel Mechanical Mod Is a Purely Mechanical Mod
With Side Button For Easy, Stylish Firing.
DS MOD Comes With a All New 100% Brass Top Connector Pin.
Build With Durable Stainless Steel With Brushed Finishing. No More Finger Prints On The Body, No More Constantly Polishing Your Precious Mod.
3 Airholes on the buttom.
510 thread
Can accomodated different types of batteries

Guys, the private and M16 clone are also in sock now!!!

Good news about the post!!!
From now on, items without E-liquid from North America customers and South America customers will be shipped with HongKong post. Fast and all with checking number, 7-10 days' shipping or less than that.
Items with E-liquid from North America customers and South America customers will be shipped with china post or singapore post. All of them are also with checking number.

And if you want to buy the items of group buying actvity, we can also give you a discount.