Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307 
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 15, 2014 22:50:22 GMT
What fruits do you prefer...I have found that a kind of fruit from one vendor is stronger than their other fruits etc.....so best to know what fruits you enjoy  Sorry been busy all day. I am not sure exactly what I like or am looking for. For fruits and sweet flavours I ordered blueberry, grape and cherry cola. The cherry cola smelled great but tasted hugely disappointing when vaped. If anyone know a good vendor that does a cola/cherry cola that tastes like the sweetie bottles then please lemme know Debbie, I liked the blueberry and grape but the flavour is just too weak. Something stronger but along those lines would suit my tastes. Also enjoyed blackcurrant and fresh lime from Darkstar. They were much more flavoursome I found but too strong on the PG. I like the sound of things like banana, watermelon, lemonade, grape, blueberry. Anything that's plain old fruity but with plenty of favour really. Have found complex flavours to be nice but only when I'm in the mood, looking for the best plain fruits to find a couple as an everyday vape. Thanks for the help guys, any good vendors for the above suggestions are most welcome. |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 15, 2014 11:18:48 GMT
So I ordered a few flavours from JJ. They aren't too bad, as mentioned elsewhere the mints and menthols are really good. The fruity flavours are somewhat lacking in punch though. Looking for something with a bit more oopmh if anyone can reccommend a good vendor specifically for fruit flavours? |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 14, 2014 21:48:52 GMT
Got a few old coils and no ultrasonic cleaner. From what I've read, cheap vodka or baking soda are two options. Any reasons for/against using either or reasons for using one over the other? Have a feeling bicarb would affect the wicks. Can replace the coils with outer wicks with cotton, some are enclosed wicks though. Don't have to be gleaming clean, just need to get rid of bad/burnt taste and see if I can extend the life of them a little. Any advice welcome, thanks for lookin Mikey |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 14, 2014 9:08:33 GMT
Hey smithyjules - if you'd like to try something a bit different I can highly reccommend the Aspire ET-S glassomiser. It doesn't use the same coils as the Evod, but it provides a great vape. It's shiny looking, looks good enough on an Evod battery being just marginally bigger than an Evod... so should please the OH. It holds 3mls of juice and can be fully disassembled for a thorough clean It does use dual coils but isn't as juice hungry as alot of other dual coils. You can get them new on myepack for £5.99, replacement coils are £1.40 if you buy 5 or more. Just got one myself this week and love it. I also have a mini protank 1 but find the aspire to give a much better flavour and vapour production. Also no troubles with wicking and leaking which had a bit using the Evod clearo. And besides that, it looks the part |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 13, 2014 19:52:10 GMT
Pm'd |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 12, 2014 9:47:43 GMT
Cheers guys, I don't know how I'd feel about ordering from slow tech. Have avoided them so far as I couldn't be bothered with the wait and if the product was faulty. Depends though, I may have to give them a try as not many people seem to have trouble with them?
I quite like the look of the 306's in the meantime. They look really simple and hassle free to use and the cost is reasonable. Going to have a look at wire just now so I am prepared for coiling when I finish college - no time until then sadly.
My only problem is, I am using mainly aspire clearos and tanks. Not the most popular for recoiling tutorials :/ anyone have any experience of recoiling their bdc? Have watched one video of a guy doing it but is not the best video tbh.
|
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 12, 2014 1:59:30 GMT
So I have decided to get a dripper. I have been reading lots so pretty up to scratch with how it works... Can't decide a few things though.
Firstly do I want a rebuildable or not? I am only 6 weeks into my vaping journey, still using ego/Evod batteries and am yet to even recoil any of my clearos, so is it worth getting an rda if it will involve a lot of special maintenance? I have a feeling i'd be better with some experience doing simple recoils but could be wrong hence asking for advice.
Next thing is, if I don't go for an rda am I better with a 306 or a 510? Just looking to drip to try flavours without the hassle of emptying and dry burning tanks every two minutes. Any suggestions or advice would be appreciated.
|
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 10, 2014 15:23:01 GMT
Just ordered...
2 x Aspire CE5 BDC
1 x Aspire ET-S Glassomizer
10 x Aspire BDC Coil Heads @ 1.8ohm
Got one CE5 BDC already and love it. Lookin forward to putting another aspire to the test.
|
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 7, 2014 11:50:02 GMT
Phoenix . , that is peculiar. You are the first person I have heard of who seems to have trouble with leaking. As it happens to be all three, it may be something to do with your use of them? Hopefully your luck cant be bad enough that you would get 3 duds? :/ Did you give them plenty time to soak before use? Also try making sure that the centre pole is totally dry and lined up perfectly with the coil head before tightening the base in. That's all I can think of but I hope they pull through for you, mines is a machine!
|
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 7, 2014 10:26:04 GMT
Hi Jerri, I might also be interested in one. Thanks for the reccommendation. Think I will be using them exclusively aswell. Keep the rest of my clearos for backups sick of contstantlt cleaning and drying the iclear16s so they are getting demoted to spare parts. |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 6, 2014 23:59:57 GMT
Hi folks, just looking to see if anyone uses these? Already have a CE5 BDC and getting a couple more - love it! Also looking at getting an ET-S Glass BDC. Has anyone used one and, if so, how good a vape do you get? How reliable are they? Any info greatly appreciated |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 6, 2014 23:54:23 GMT
Welcome teethcv, just a little friendly suggestion - when you find a juice that works, go back and try the aspire BDC again. I am new to vaping, tried iClear16s but a lot of leaking and cleaning. Tried the aspire BDC on a recommendation and absolutely love it. I like a nice throat hit aswell, my juice is 70/30 pg/vg and I get a great hit from the aspire. Also got a mini protank and evod, the protank mini is solid and a really nice hit, not quite the same with only one coil though... The aspire is definitely the most consistent I have used, great hit every time - although there may be others who have tried a wider range and could reccommend better, the CE5 BDC is a great clearo when starting out. Let me know your verdict when you get your juice issue sorted. Best of luck, Mikey. |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 4, 2014 14:45:27 GMT
At the moment just looking at a plethora of coil heads for evod/protank, aspire BDC, iclear30 and iClear16. Also another aspire BDC, an iTaste vv v3, a beauty ring for my ego batteries, an ultrasonic cleaner. Just bits to keep my gear i have well maintained and working. And quite fancy changing to vv for when I'm at home. On a tight budget though! Could be a while before I acquire it all. Think this is the start of my shinyitis. Getting quite meticulous about keeping my gear looking shiny and fingerprint free |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Hello :)
Apr 4, 2014 12:07:48 GMT
via mobile
Post by Mikey@Vaporized on Apr 4, 2014 12:07:48 GMT
I think whilst not as shiny as mods etc, the ego kits are great. They do what they say on the tin. Congratulations on no smoking for a year and a warm welcome to aaec! |
|
Mikey@Vaporized
VENDOR Employee/Associate
Family Man
Joined:March 2014
Posts: 307
Location:
Likes: 209
Recent Posts
Last Online Aug 2, 2014 23:31:29 GMT
|
Post by Mikey@Vaporized on Apr 2, 2014 10:44:07 GMT
stu1873, don't suppose you ever saw my last post? Still looking for experienced vapers in the area for some practical advice and maybe a chance to see some mods and things hands on. I understand many people don't like the idea of meeting people from forums, but I am just along the road and can't seem to find anyone around here. If you have the time and would like to meet up to share some info and experiences, would be greatly appreciated. Am still relatively new and looking to upgrade soon but as to what is a mystery so far! Regards, Mikey.
|
|
