Stan
Junior Member
Joined:August 2010
Posts: 68
Location:
Recent Posts
Last Online Nov 11, 2014 22:26:24 GMT
|
Post by Stan on Dec 28, 2010 20:51:18 GMT
1. I have quite a few atomisers that still work, but don't seem to produce much vapour anymore. Instead of throwing them away, it occurred to me that they would be useful on a higher voltage (I use a Tornado at 3.7V).
Is there a low cost device available that will give a higher voltage?
2. Recently bought an LR 510 atomiser to try - but found as soon as I tried to use it with a Tornado cart. the cart started to melt (not pleasant !) I did align it as best I could, but looking inside the cart, the mesh (below the bridge) looks higher than a std 510 atomiser. I've had problems with carts melting before, but getting the alignment right seemed to prevent it. In this case its the outside of the flat edge which has melted.
I think the tornado carts would be better if they didn't have the flat edge but I guess there must be a reason for it.
Has anybody used 510 LR's with a Tornado?
|
|
|
|
Post by Perpetua on Dec 28, 2010 20:57:51 GMT
Hi Stan,
A Garry Dibley Pass Through is EXACTLY what you need to breathe new life into your fading atties . . . works a dream with a USB mains hub.
Bear with me and I'll get you some links.
|
|
|
|
Post by Chrissie on Dec 28, 2010 21:04:33 GMT
|
|
|
|
Post by Perpetua on Dec 28, 2010 21:05:16 GMT
|
|
|
|
Post by Perpetua on Dec 28, 2010 21:05:44 GMT
|
|
|
|
Post by Chrissie on Dec 28, 2010 21:06:16 GMT
Lol Perpy, didn't see you there cos I was off looking for the 3a/5v hub link  |
|
|
|
Post by Perpetua on Dec 28, 2010 21:07:13 GMT
I went as quick as I could for Stan!  |
|
|
|
Post by Chrissie on Dec 28, 2010 21:10:46 GMT
Oh (((((Perpy)))) I'm so sorry  Really didn't mean it to look like I was trying to beat anyone else wanting to help - far from it. |
|
|
|
Post by Perpetua on Dec 28, 2010 21:15:41 GMT
No worries Chris, I didn't take it that way at all, rest assured.  There you go Stan, two ladies rushing to help you, even more happily we both posted the same links. |
|
Stan
Junior Member
Joined:August 2010
Posts: 68
Location:
Recent Posts
Last Online Nov 11, 2014 22:26:24 GMT
|
Post by Stan on Dec 28, 2010 21:25:27 GMT
Thanks to both of you - I knew i would get good advice here - looks like Gary Dibley is the answer ! - off to research...
|
|
|
|
Post by Chrissie on Dec 28, 2010 21:44:24 GMT
(((Perpy))) Stan, it's blooming brilliant with the 5v/3A USB hub. Both soon more than pay for themselves as no batteries are needed. |
|
Scylla
Super Member
Joined:October 2009
Posts: 9,605
Location:
Likes: 4
Recent Posts
Last Online Mar 10, 2017 19:24:29 GMT
|
Post by Scylla on Dec 28, 2010 23:06:09 GMT
{{{Perpy}}} |
|
|
|
Post by Perpetua on Dec 29, 2010 3:46:42 GMT
I bought this combo for a vaping friend's Christmas pressie . . . they love it! Only problem is, I won't get their fading atties to use anymore, but no matter, spreading the word on how brilliant this set up is, is all that matters. |
|
Stan
Junior Member
Joined:August 2010
Posts: 68
Location:
Recent Posts
Last Online Nov 11, 2014 22:26:24 GMT
|
Post by Stan on Dec 31, 2010 21:15:09 GMT
Well my GDPT has arrived at the speed of light ! - looks very good - but doesn't work on my mains USB plug adaptor (rated 0.5A so I guess thats not enough). An order for that USB hub will be on its way shortly...
|
|
|
|
Post by Chrissie on Dec 31, 2010 21:23:19 GMT
Stan, if your hub is only 0.5A rather than a minimum of 2.0A, you are right. It really isn't enough. Hope your new hub arrives very quickly  |
|
Really didn't mean it to look like I was trying to beat anyone else wanting to help - far from it.
