Sigelei Zmax Menu System

[maccafan]

A ready reckoner for those who prefer written instructions:



Ganked shamelessly from Phil's video:



Watch from approx. 12.40 to see the menu and sub menu's in action.

[Perpetua]

Nice one Macca . . . I was a bit confuddled at first, so used to a Provari menu function, but it's really easy in practice.

[Juice Kitchen]

Just make sure you set it to RMS on menu 8!

[mhyquel]

Dec 11, 2012 22:23:08 GMT Juice Kitchen said:

Just make sure you set it to RMS on menu 8!

Dude, I put it to 'mean' to see what all the fuss was about. It wasn't terrible.

I forgot to set it back, and I couldn't figure out why 3.5v was blasting my atties.

Yeah, they needed to change that.

[Mev]

going to save that image incase I get confuddled, nice work macca.

[davemorton]

Like a few others here, I have just had one of these appear through my letterbox today ( many thanks all involved!) and wondering if anyone could give me an example of the settings I should have for the following (as it beyond me!):-
1. Bauway LR 306 dripper
2. Clearo 1.4-1.8
3. Clearo 2.4-2.8

Many thanks in advance.

[DiscoDes]

Start at 4 watts then see how it goes, gradually increase until it vapes right for you. Once set you can swap between any resistances and you will not need to alter the setting.

[davemorton]

Is changing the wattage and changing the voltage the same thing?? Or do I change both?? (sorry for all the questions)

[4madcats]

Feb 12, 2013 23:11:11 GMT davemorton said:

Is changing the wattage and changing the voltage the same thing?? Or do I change both?? (sorry for all the questions)

Go into menu no'7 & you have the option, voltage gives you the V's . . . power gives you the wattage W's, one or the other then set to your preference, no you don't set both.

Sorry that sounded harsh, but as Des said work your your way up & find out what works best for you either in W's or V's

[davemorton]

Feb 12, 2013 23:22:52 GMT 4madcats said:

Feb 12, 2013 23:11:11 GMT davemorton said:

Is changing the wattage and changing the voltage the same thing?? Or do I change both?? (sorry for all the questions)

Go into menu no'7 & you have the option, voltage gives you the V's . . . power gives you the wattage W's, one or the other then set to your preference, no you don't set both.

Sorry that sounded harsh, but as Des said work your your way up & find out what works best for you either in W's or V's

Not harsh at all, thanks for the reply. I moved the W's up like Des said, but wasnt sure if I should be moving the V's up too, or if one was the same, just a different measurement (if you know what I mean, like inches and cm).

[bomberharris]

if your adjusting the w's up it auto adjusts v's its self

[ant]

Macca, you should sell that to the manufacturers.

[Perpetua]

Feb 13, 2013 0:12:01 GMT bomberharris said:

if your adjusting the w's up it auto adjusts v's its self

The two don't work in tandem though Bomber, it's either or  . . . if you're using the wattage function, then whatever you attach to the device will perform at that setting. Not so with voltage, you'll have to adjust that according to what you screw on to any VV device. 

[bones3]

I have not had the chance to use mine as all my dids don't fit and my choddys are set up for my roller!
I Will get a choddy set up for for it tomorrow and give it a whirl. Foot know what to do about of dids not fitting i might have to get a tap to see if the z max thread is on the the tight side!

[blakey]

Feb 15, 2013 22:17:24 GMT bones3 said:

I have not had the chance to use mine as all my dids don't fit and my choddys are set up for my roller!
I Will get a choddy set up for for it tomorrow and give it a whirl. Foot know what to do about of dids not fitting i might have to get a tap to see if the z max thread is on the the tight side!

???
My DiDs fit mine just fine?