Problems with new Nova head

[Neil from Valley Vapes]

Offer still stands here mate anytime. I wound mine to around 2.2 and they work brilliant and I thought they were good as standard but when rewicked they are much much better.

[kibbster]

I'm going to have to get into this re-wicking.
Everyone says it makes a huge difference.

[stitch]

i been avin the same problem with the damn jumpy resistance recently doing my nut in , so i ordered a new one from jason others i had from sumwhere else and it seems better not perfect (still cuts off occassinaly mid draw) lol but its just up and down 0.1 every few fires rarther than 3-4ohms difference slowly loosein patience waiting for the next big thing

[Neil from Valley Vapes]

its easy too m8 i think i cocked up my first one after that they are spot on. Best one I have made so far had 5x1mm wicks and was wound at 2.2 ohm's give m loads of vapour but drank the juice rofl.

[Tom]

You don't have to spend a lot either. Buy a small amount of 0.2 kanthal wire and a small roll of silica wick. You can see if you get on with it. Nothing ventured and all that. I'm sure you would get on just fine. There are plenty of great step by step tutorials on YouTube. www.google.co.uk/url?q=http://www.youtube.com/watch%3Fv%3DTSP-8EIjOsM&sa=U&ei=in8NUYaJE-iW0QWd64DoDQ&ved=0CC8QtwIwAA&sig2=dZm6RudLDO6Fopd7GQA8lQ&usg=AFQjCNH_v8JubG7IRgB0fcQ157Mket9zcQ

[Karma]

You can also buy pre-coiled wick, I have some but haven't tried it yet

[Neil from Valley Vapes]

I use .16 wire on mine from dee on here and my wick i got from cig e liquid www.cig-eliquid.co.uk/fiberglass_Silica_wick_2mm-15mm-1mm/p649230_2911788.aspx and as Tom said it is really easy.

[vicuk]

hi i have the same problem as you tried 2 new heads will not work going to look At mine but mine will not work at all

[Karma]

Vic, what are you using the Nova's on?

Have you made sure you've screwed the head in properly? I find sometimes they work loose when you unscrew the top to fill up!

[Neil from Valley Vapes]

mine do that too scared the hell out of me the first time lol.

[Karma]

I threw 2 perfectly good heads out before I realised what was happening :-[

[Tom]

Hi Vic, welcome to the forums. I see you are new. If you are getting absolutely nothing. Just go back to basics, check your batt is charged, check the head is on properly, have a look at the coil, see if it lights when firing. If you explain you're problem in detail you will get some sound advice. Good luck. Tom 8)

[Neil from Valley Vapes]

Feb 2, 2013 21:26:22 GMT Karma said:

I threw 2 perfectly good heads out before I realised what was happening :-[

Not good at 3 quid a pop.