Aga - T Setup help

[brysoni23]

Just rewick it with Silica taste and Vape was ok but not amazing.

I want to set it up with SS, so could you let me know what Size mesh is best for it, and with what wire? flat normal 0.16. 0.2 etc.

Also i will need a flame of some sort.

Cheers
Ryan

[Ron]

The best reply I can give is look in the reviews and watch Todds set up

[Tom]

www.toddsreviews.com/search/label/Tutorials

[Ron]

[brysoni23]

Cant view videos at work Flash player is disabled

Thats why i asked what stuff to buy, so i can buy it now and then watch some videos over the weekend

[Tom]

0.2 kanthal wire - see deesigner

400-500 grade mesh - www.themeshcompany.com/acatalog/25-micron-super-fine-mesh.html

[Tom]

no reason why youre silica shouldnt be kicking out some serious vape though pal.

Have you had a couple of goes at it?

[brysoni23]

Ive only got 2mm wick on it at 2.1 ohms. so maybe not enough wick.
Had a few puffs but my break ended so left it to soak and will try it at 1400. See how it is then.

Also how much mesh should i buy? Im unsure how big of a piece you would use each time.

[brysoni23]

And what size Micron? or does it not matter about that?

[Mev]

as Tom said above, #400 or #500 mesh from the mesh company, aga-t needs about 45mm length wick and anything upto 90 width for rolling. An A4 sheet should last you a while. I perfer .2 kanthal myself for the aga-t and aim for around 4/5 wraps and 1.8 ish ohm.

[brysoni23]

but #400 comes in 25micron. 30micro etc is there a difference and if so what thickness do i need ?

[bomberharris]

Feb 21, 2013 13:36:03 GMT brysoni23 said:

Ive only got 2mm wick on it at 2.1 ohms. so maybe not enough wick.
Had a few puffs but my break ended so left it to soak and will try it at 1400. See how it is then.

Also how much mesh should i buy? Im unsure how big of a piece you would use each time.

not enough wick bryson123 double it up

[Mev]

I've got this 25 micron #400 www.ebay.co.uk/itm/Stainless-Steel-e-Cigarette-Mesh-Super-Fine-400-25-Micron-A4-Sheet-/150996740398?pt=UK_Crafts_Other_Crafts_EH&hash=item23281b692e

[brysoni23]

When you double wick, should it just be doubled where you wrap the coil?
Or just do 2 x 2mm lenghts so there is 4 wicks hanging in the tank.

[bomberharris]

Feb 21, 2013 14:36:07 GMT brysoni23 said:

When you double wick, should it just be doubled where you wrap the coil?
Or just do 2 x 2mm lenghts so there is 4 wicks hanging in the tank.

yes all of it doubled four wicks hanging down should do the same in your vivi's aswell with that size wick