Why did you, or why not buy an evic

[robby]

Mar 29, 2013 18:34:09 GMT Toondog said:

bomberharris thanks for the pm bomber that's very good of you.
robby would my 2000mah effests fit do you think?
Cheers fellas
Chris.

I dont know mate, I dont have any. They are measured as 18.2mm wide on the web, some slightly higher. I know that my Panasonic CGR18650CH are a little bigger than that, so they should be fine  Toondog Certainly none of my protected ones will fit in the Chrome tube for my Evic

[Toondog]

Thanks robby I'm sick of waiting for it to arrive already! I need to get a grip.
Chris.

[robby]

Mar 29, 2013 18:51:47 GMT Toondog said:

Thanks robby I'm sick of waiting for it to arrive already! I need to get a grip.
Chris.

You could probably buy a "grip" somewhere lolol Toondog

[bomberharris]

Mar 29, 2013 18:49:21 GMT robby said:

Mar 29, 2013 18:34:09 GMT Toondog said:

bomberharris thanks for the pm bomber that's very good of you.
robby would my 2000mah effests fit do you think?
Cheers fellas
Chris.

I dont know mate, I dont have any. They are measured as 18.2mm wide on the web, some slightly higher. I know that my Panasonic CGR18650CH are a little bigger than that, so they should be fine  Toondog Certainly none of my protected ones will fit in the Chrome tube for my Evic

have you tryed through the top instead of the bottom robby

[robby]

Mar 29, 2013 20:44:19 GMT bomberharris said:

Mar 29, 2013 18:49:21 GMT robby said:

I dont know mate, I dont have any. They are measured as 18.2mm wide on the web, some slightly higher. I know that my Panasonic CGR18650CH are a little bigger than that, so they should be fine  Toondog Certainly none of my protected ones will fit in the Chrome tube for my Evic

have you tryed through the top instead of the bottom robby

What are you on bomber? I want some  lolol



bomberharris

[OneDay]

Mar 29, 2013 16:13:53 GMT Toondog said:

Just ordered the head and chrome body (for now ) from bargain vapour, I'm blaming you lot.
Chris.

Chris is there a discount code for bargain vapour?

[Deleted]

Mar 29, 2013 21:52:07 GMT OneDay said:

Mar 29, 2013 16:13:53 GMT Toondog said:

Just ordered the head and chrome body (for now ) from bargain vapour, I'm blaming you lot.
Chris.

Chris is there a discount code for bargain vapour?

hi oneday, i ordered my chrome tube & control head yesterday, if you want a discount code you need to contact via email and he may send you one, he sent me a 10% dizzy code but it only works as per registered account, in total using paypal inc insured delivery after the exchange rate i paid £49, i was only buying a new control head

[Deleted]

Mar 28, 2013 20:52:18 GMT Greigster said:

How easy is that to do Robby?

Hi greigster, real easy, download the factory reset file from www.joyetech.com/support/down_nr.php?id=20&k=2
browse save and overwrite the file thats already in the HEX folder of the MVR application folder, plug in your eVic and go through an upgrade as normal. the only thing is if you want to revert back to 1.2 you have to uninstall MVR application and re-install it as the 1.2 firmware is not an available download on its own it's only available in the MVR 1.2 application. Hope this makes sense

[Toondog]

Mar 29, 2013 21:52:07 GMT OneDay said:

Mar 29, 2013 16:13:53 GMT Toondog said:

Just ordered the head and chrome body (for now ) from bargain vapour, I'm blaming you lot.
Chris.

Chris is there a discount code for bargain vapour?

I couldn't find one anywhere matey, came to £53.86 for the head and the chrome tube posted recorded and insured.

[Greigster]

Mar 29, 2013 22:21:49 GMT @freestyler said:

Mar 28, 2013 20:52:18 GMT Greigster said:

How easy is that to do Robby?

Hi greigster, real easy, download the factory reset file from www.joyetech.com/support/down_nr.php?id=20&k=2
browse save and overwrite the file thats already in the HEX folder of the MVR application folder, plug in your eVic and go through an upgrade as normal. the only thing is if you want to revert back to 1.2 you have to uninstall MVR application and re-install it as the 1.2 firmware is not an available download on its own it's only available in the MVR 1.2 application. Hope this makes sense

Thanks freestyler, I think robby was going to have a go so I will wait to see how he gets on and if he thinks it is worth it.

[robby]

Greigster @freestyler


I have just done it, it`s a bloody nightmare, I tried last night and gave up, but I think I have it running now. So I have version 1.0 firmware running with MVR 1.2

With it being V 1.0 firmware I am only getting the voltage to adjust. So I have it set at 4.6V on a 1.4 ohm atty, which in theory is giving me just over 15 watts. It will go all the way up to 5 v, I dont dare lol. I really cant be sure exactly what I am getting as a vape. I have no idea what limits on ampage are now set with it being the earlier firmware It calculates at 3.3 amps. It certainly seems like a more powerful vape. I am gonna try and wire up the atty to a meter and see what I am getting there if possible.

[Greigster]

Cheers Robby, will wait for further update from you.

[bomberharris]

Mar 29, 2013 21:08:37 GMT robby said:

Mar 29, 2013 20:44:19 GMT bomberharris said:

have you tryed through the top instead of the bottom robby

What are you on bomber? I want some  lolol



bomberharris

my tubes not like the original you can put the battery in the top

[Greigster]

Any further news on the Ver.1 software and how it is going robby?

[robby]

Well I got a stronger warmer vape for sure Greigster, but I have decided to put it back to the latest version of the software and firmware, the difference really isnt enough to justify keeping it on the other one. When I need a strong vape, I`ll stack the 18350s on the vamo