lordylordy
Junior Member
Joined:June 2011
Posts: 59
Location:
Likes: 1
Recent Posts
Last Online May 16, 2021 17:31:29 GMT
|
Post by lordylordy on Jun 18, 2011 13:07:28 GMT
desperate for advice does anyone know if it is actually possible to tighten your 510 batt and atty so much that it reduces the performance of the unit.
the word desperate might seem a bit srong but am having problems getting a decent vape
|
|
VE Jason
Super Member
Joined:February 2011
Posts: 5,952
Location:
Likes: 2,195
Recent Posts
Last Online Nov 23, 2024 21:31:56 GMT
|
Post by VE Jason on Jun 18, 2011 13:11:20 GMT
Depending on the device, tightening and loosening of the atty can alter the vape a bit, airflow wise.
However, over tightening should not be done because it can damage the battery contacts.
|
|
|
Post by Chrissie on Jun 18, 2011 13:17:54 GMT
Lordy, a couple of other reasons you may not be getting a good vape -
1) your cartridge isn't wet enough - so needs filling with more juice & add a couple of drops directly to the atomiser 2) You have filled it too much & flooded the attie. If so, remove attie from battery, blow out excess juice & wipe clean battery & attie contact points.
|
|
lordylordy
Junior Member
Joined:June 2011
Posts: 59
Location:
Likes: 1
Recent Posts
Last Online May 16, 2021 17:31:29 GMT
|
Post by lordylordy on Jun 18, 2011 13:32:15 GMT
thanks guys, flooding could be the problem am often dripping too much and have to wipe down the unit
|
|
River
VENDOR
Chief Trouble Maker
Joined:April 2011
Posts: 3,118
Location:
Likes: 694
Recent Posts
Last Online Jul 15, 2024 6:44:02 GMT
|
Post by River on Jun 18, 2011 13:39:44 GMT
is it by any chance a ego or riva you are using
if i dont reply straight away its because im decorating (again)
|
|
lordylordy
Junior Member
Joined:June 2011
Posts: 59
Location:
Likes: 1
Recent Posts
Last Online May 16, 2021 17:31:29 GMT
|
Post by lordylordy on Jun 18, 2011 14:35:37 GMT
all i know is its a standard 510 kit sorry dont know more than that
|
|
Lee
Super Member
Update status? Wut?
Joined:April 2011
Posts: 1,212
Location:
Likes: 43
Recent Posts
Last Online Apr 13, 2016 12:10:34 GMT
|
Post by Lee on Jun 18, 2011 14:41:34 GMT
If you tighten it too hard you could push the battery connection in on the battery. Then you won't get a good contact, so be careful when attaching everything together.
|
|
River
VENDOR
Chief Trouble Maker
Joined:April 2011
Posts: 3,118
Location:
Likes: 694
Recent Posts
Last Online Jul 15, 2024 6:44:02 GMT
|
Post by River on Jun 18, 2011 15:00:21 GMT
i think thats what happened have a look at the battery end. is the battery connection level or below the rubber/silicon washer??? same happened to me but it can be sorted
|
|
lordylordy
Junior Member
Joined:June 2011
Posts: 59
Location:
Likes: 1
Recent Posts
Last Online May 16, 2021 17:31:29 GMT
|
Post by lordylordy on Jun 18, 2011 15:55:19 GMT
lee, river thanks guys have checked battery seems in good working order connections good too could be im just having an off day have cleaned everything off and vape is now reasonable but throat hit and flavour not really there maybe need to leave it alone for a while just panicked this morn when nothing seemed to be working
|
|
|
Post by jerryrm on Jun 18, 2011 16:23:30 GMT
There is no need to overtighten it, as all you need is a good electrical contact. As Jason said, over tightening may restrict the airflow. A snug fit is good enough.
Listen to what Chrissie said, those are probably the reasons that you are not getting a good vape.
|
|
lordylordy
Junior Member
Joined:June 2011
Posts: 59
Location:
Likes: 1
Recent Posts
Last Online May 16, 2021 17:31:29 GMT
|
Post by lordylordy on Jun 19, 2011 1:08:40 GMT
well all is well now it would seem i was over filling over tightening reducing airflow as pointed out and over vapeing too throat was a bit dodgy
thanks all
|
|
Hanow
Super Member
Joined:June 2010
Posts: 1,015
Location:
Recent Posts
Last Online Feb 6, 2013 19:26:53 GMT
|
Post by Hanow on Jun 19, 2011 10:24:19 GMT
Lordy, just be aware that we all have 'off' days, where nothing seems to work - for unknown reasons. Sooooo frustrating. Even more so when the whole lot kicks in at a later stage, when you haven't really done anything to chage it all. However, for days like those, I ensure that I have a freshly charged battery ready and waiting, along with a new attie. I make sure everything is clean and tidy (no juice dripped somewhere etc.) and also make sure that my juice is of the right consistency. You don't need it too thick, nor do you need too much as it will drown. As Chrissie said, dripping a few drops directly on to the attie may well help. Do you have any drip tips? I have more or less given up on filling cartridges. You can have a problem there with them being too compacted (with the fluffy stuff - so no juice is actually seeping through), or too little, causing over-leaking/ drowning of the attie. Good luck, and keep at it. You do learn a bit more each day.
|
|
lordylordy
Junior Member
Joined:June 2011
Posts: 59
Location:
Likes: 1
Recent Posts
Last Online May 16, 2021 17:31:29 GMT
|
Post by lordylordy on Jun 19, 2011 10:59:38 GMT
hi hanow vapeing ok now was defo an off day have had a few of them have only been vapeing around two weeks using standard 510 kit and dripping (quite often too much) which was adding to my woes yesterday. was also over tightening the batt+ attie infact think i had all the general mistakes covered yesterday
|
|
River
VENDOR
Chief Trouble Maker
Joined:April 2011
Posts: 3,118
Location:
Likes: 694
Recent Posts
Last Online Jul 15, 2024 6:44:02 GMT
|
Post by River on Jun 19, 2011 11:04:13 GMT
Lordy
try Dual Coil Cartomizers,jason at vape escape has them superb way to vape
|
|
Hanow
Super Member
Joined:June 2010
Posts: 1,015
Location:
Recent Posts
Last Online Feb 6, 2013 19:26:53 GMT
|
Post by Hanow on Jun 19, 2011 11:56:03 GMT
Lordy - it does take time to get your head arlund what makes the gizmos work effectively. I have been vaping for a year now, and am not at all scientific, technical, nor practical. The guys in here however are so helpful with tips and advice. I am a slow learner, but they are very patient with me - thankfully. So do keep posting your queries. As River has said, give the Clearos a try. I have just tried one today for the first time (from Jason at VapeEscape) - good price and vaping heaven so far! They have 510 fittings, so will attach to your batteries.
|
|