Help please AGAIN

[holycow]

Righto
Using the screwdriver at the moment!
Using an egoT atty with it - which I have the connecntion for
BUT - just brought the STRAIGHT egoT atties from LF and I cannot get them to work!

Spoke to Perp the other night and she suggeted anoother connection - or two - on the connection I already have - but haveforgottonwhat she said - anyone hep with this please?

Thanks YET again

[VE Jason]

Not sure what connection your SD is Holycow, but 510-510 and then 510-Ego or 901-510 and then 510-Ego are both possibles.

I thought there was a dedicated tank adapter now for the SD, to be honest.

Obviously not up to speed

[holycow]

Jun 20, 2011 11:15:55 GMT VE Jason said:

Not sure what connection your SD is Holycow, but 510-510 and then 510-Ego or 901-510 and then 510-Ego are both possibles.

I thought there was a dedicated tank adapter now for the SD, to be honest.

Obviously not up to speed

Yep! I have the dedicated adapter - but the longer bigger egoT atties - although they do fit onto it it is not connecting for some reason,

TBH really -p*ssed off with this order as LF were of little help - and it were a £40 order so you would have thought them more willing to help!

[VE Jason]

Ok, the 510-Ego adapter.

If you look inside it (the end that the ego goes on), you should see that it has a groove that will accept a small screwdriver.

Try adjusting it a turn or 2 in either direction - it may not be making full contact.

I haven't got the adapter in front of me at the moment so can't tell you which direction raises the centre pin off hand.

[Scylla]

Thanks for helping, Jason - I've never had sight of these models in the flesh so it's all vapour to me

scylla

[River]

hloycow see link below,is this the adaptor???
look what cloud 9 say about it.LF could be the same
www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/AD-510-EGO

[Perpetua]

The Screwdriver adapter for Tanks is different to the Ego-T adapter, in as much as you're going from a 901 to a 510 connection . . . my SD works fine with the Tanks, but not with the Mega Atomisers . . . I'm assuming the connections are at different heights and that's why.

So I suggested to HC that she uses a 901/510-510/901-901/510, that does work with the 3 adapters, looks a bit weird though.

But she forgot me pearls of wisdom.

[foxy9212]

I use a 901 to 510 standard adaptor, plus a 510 charging adaptor - looks silly but works.

Fox:)