Loving the eVic !

[siffy]

Oct 24, 2013 21:15:35 GMT Village idiot formerly tjlumle said:

Oct 24, 2013 13:02:16 GMT siffy said:

Thanks dinamic22 xx

Are you thinking of purchasing one? I did but it was darn comments that spiked my interest as was trying to curve the spending. Will let you know how I get on with it

I got mine a couple of weeks ago Village idiot formerly tjlumle. I like it but I haven't explored it fully yet as I just attach the iclear30 and vape. To me it gives a slightly less hollow vape than the MVP2 and spinner which will come into it own for me as I seem to be knocking down my nic levels. So sorry I can't explain it any better but I really am just an ease of use vape and get on with the day gal. Would I buy it again at the reduced price? Yes. Would I pay full whack probably no, as the gadget info is wasted on me personally. Hope that helps?

[Village idiot formerly tjlumle]

What's the lowest atomizer resistance that can be connected to the evic? Is it 1.5 ohm or lower?

[Deleted]

Oct 28, 2013 4:29:30 GMT Village idiot formerly tjlumle said:

What's the lowest atomizer resistance that can be connected to the evic? Is it 1.5 ohm or lower?

Village idiot formerly tjlumle  ... I am not a techy type so the following is only my best guess and should be taken with a pinch of salt lol

I think the evic switch is rated at 4 amps maximum, so using ohms law where resistance = volts divided by amps, if you were to vape at the lowest voltage setting of 3 volts then the lowest atty resistance that the evic would be able to handle would be 3/4 = 0.75 ohms 

[Village idiot formerly tjlumle]

Oct 28, 2013 6:48:53 GMT @freefromsmoking said:

Oct 28, 2013 4:29:30 GMT Village idiot formerly tjlumle said:

What's the lowest atomizer resistance that can be connected to the evic? Is it 1.5 ohm or lower?

Village idiot formerly tjlumle  ... I am not a techy type so the following is only my best guess and should be taken with a pinch of salt lol

I think the evic switch is rated at 4 amps maximum, so using ohms law where resistance = volts divided by amps, if you were to vape at the lowest voltage setting of 3 volts then the lowest atty resistance that the evic would be able to handle would be 3/4 = 0.75 ohms 

Was only wondering as the svd won't work below 1.3 I believe

[Roscopecotrain]

Oct 28, 2013 6:48:53 GMT @freefromsmoking said:

Oct 28, 2013 4:29:30 GMT Village idiot formerly tjlumle said:

What's the lowest atomizer resistance that can be connected to the evic? Is it 1.5 ohm or lower?

Village idiot formerly tjlumle  ... I am not a techy type so the following is only my best guess and should be taken with a pinch of salt lol

I think the evic switch is rated at 4 amps maximum, so using ohms law where resistance = volts divided by amps, if you were to vape at the lowest voltage setting of 3 volts then the lowest atty resistance that the evic would be able to handle would be 3/4 = 0.75 ohms 

Must be higher than that ffs as my evic wont fire my 0.9ohm coil.

[Deleted]

Oct 28, 2013 9:14:27 GMT Roscopecotrain said:

Oct 28, 2013 6:48:53 GMT @freefromsmoking said:

Village idiot formerly tjlumle  ... I am not a techy type so the following is only my best guess and should be taken with a pinch of salt lol

I think the evic switch is rated at 4 amps maximum, so using ohms law where resistance = volts divided by amps, if you were to vape at the lowest voltage setting of 3 volts then the lowest atty resistance that the evic would be able to handle would be 3/4 = 0.75 ohms 

Must be higher than that ffs as my evic wont fire my 0.9ohm coil.

Maybe the evic switch is rated lower than 4 amps? or your evic was set at a higher voltage? ... as I said to TJ "I think" and most times I don't think too great  

[Roscopecotrain]

Oct 28, 2013 9:23:44 GMT @freefromsmoking said:

Oct 28, 2013 9:14:27 GMT Roscopecotrain said:

Must be higher than that ffs as my evic wont fire my 0.9ohm coil.

or your evic was set at a higher voltage?

Didn't think of that ffs.

[Village idiot formerly tjlumle]

Evic arrived ordered the 28th so good delivery to London from bargain vapour. How light is it! Compared to svd and vamo they weigh a ton!

[Dan]

Lowest it will fire reliably is 1.2ohm from my experience.

They truly are a marvel for the vaping world. . Wouldn't be without my two!!

[Deleted]

BUMP ... photos added to OP

[Village idiot formerly tjlumle]

Oct 29, 2013 5:42:29 GMT @freefromsmoking said:

BUMP ... photos added to OP

What's the tank/ clearo on the black evic in the pic mate?

[Perpetua]

Oct 29, 2013 7:20:38 GMT Village idiot formerly tjlumle said:

Oct 29, 2013 5:42:29 GMT @freefromsmoking said:

BUMP ... photos added to OP

What's the tank/ clearo on the black evic in the pic mate?

I'm not FFS.

But it's a Vivi Nova with a STV tube Tj.

www.vapeescape.co.uk/Vaping-Spares/Tanks--Accessories/Vision-Vivi-Nova-STV-Spare-Tubes.html

[Jerri]

Oct 29, 2013 7:20:38 GMT Village idiot formerly tjlumle said:

Oct 29, 2013 5:42:29 GMT @freefromsmoking said:

BUMP ... photos added to OP

What's the tank/ clearo on the black evic in the pic mate?

Looks like a vivi nova stv to me.

[Village idiot formerly tjlumle]

Thanks think I'm gonna wait until kir fanis has the black o rings back in and get the fotia as it's 22mm shame it ain't got a glass tank though

[Super-Shiny]

Oct 29, 2013 7:28:24 GMT Village idiot formerly tjlumle said:

Thanks think I'm gonna wait until kir fanis has the black o rings back in and get the fotia as it's 22mm shame it ain't got a glass tank though

Cannot understand the language but i think they have got some here: www.vapeclub.gr/index.php?id_product=245&controller=product&id_lang=7