Chi You Style Mod £12-24 FT

[robby]

www.fasttech.com/products/1/10005381/1608900-chi-you-style-mechanical-mod

Rob

[Griff]

robby how many more Chi You`s will FT stock

Griff

[denis9t9]

Jan 19, 2014 10:35:56 GMT Griff said:

robby how many more Chi You`s will FT stock

Griff

Griff not sure if you are aware of this but robby is a Fasttech rep in disguise

[robby]

Jan 19, 2014 10:35:56 GMT Griff said:

robby how many more Chi You`s will FT stock

Griff

Depends how quickly I can churn them out mate going for Titanium next

[Griff]

robby put me down for one if the price is around £15

Griff

[Deleted]

robby ... a little heads up mate as you are our Fasttech rep .. if and when FT stock the Tobeco Squape be aware of a potential problem. I couldn't wait and bought mine from The Vapour bar in the UK but the problem has nowt to do with them as their service has been spot on but with the Tobeco clone itself. The original Squape comes with a PMMA inner tank while the clone comes with a pyrex inner tank .. happy days you might say, an improvement over the original. Not so I'm afraid, as the glass tank is not quite airtight ... juice weeps very slightly from the "ship's cabin style" windows but more importantly, when the juice level drops to around half full, it looses the vacuum and leaks through the 510 connector. I have fixed mine with the moderate application of waterproof silicon sealant around the top and bottom of the glass tank ... renewing the two O rings that are supposed to seal the glass tank against the steel outer with two thicker O rings may also have solved the problem but I didn't have any to hand. This seems to be a common problem with this clone as I have come across a youtube video where the owner butchered a plastic tank from some other rba and used it to get an airtight seal. My diy fix has worked fine with a couple of tankfuls through it and no leaking but I have ordered an original full stainless steel tank section replacement from C9V as I can't be sure how long the silicon fix will last.
Other than this problem, the clone is a very well build device and the vape is spot on.

[robby]

Jan 19, 2014 16:33:44 GMT Griff said:

robby put me down for one if the price is around £15

Griff

ooooooo, dont think so Griff, it`ll be at least £16-33

[alansi]