best atty for sub ohming

[blanco]

can someone suggest a decent atty for sub vaping, i dont really fancy a dripper. cant be arsed keep topping up after a few pulls

currently using a fogger v3 with a 1.1 ohm coil in a mech mod but find that if juice is 60/40 keep getting burnt hits with a fully charged battery, if using 70/30 pgvg its ok.
ordering some efest 18650 pa35a would like a tank that can hold some juice rather than a dripper, any suggestions?

[ionian]

I'm not in to sub ohming, and "best" is going to be subjective of course, but from the sounds of things you need an atty that wicks quickly and holds a fair bit of juice.

For a single coil set up, the Expromizer has deep juice channels and wicks faster than my 1.5ohm coils can burn the juice. Make sure you watch a vid on set up, but once it's airtight and ready to roll it's a fantastic vape.

It's a lot easier to manage than a fogger, that's for sure! In fact most rbas will be better for sub-ohming than a fogger, just because it doesn't work well with anything but the smallest wick. 

I'm sure someone with more knowledge on the subject will be able to advise further...

[enjay]

I've ordered some drill bits and things, going to mod my kayfun/russian clone and try it sub ohms, see if I can make clouds lol. Might be an idea for the future.

[blanco]

Apr 4, 2014 16:07:17 GMT ionian said:

I'm not in to sub ohming, and "best" is going to be subjective of course, but from the sounds of things you need an atty that wicks quickly and holds a fair bit of juice.

For a single coil set up, the Expromizer has deep juice channels and wicks faster than my 1.5ohm coils can burn the juice. Make sure you watch a vid on set up, but once it's airtight and ready to roll it's a fantastic vape.

It's a lot easier to manage than a fogger, that's for sure! In fact most rbas will be better for sub-ohming than a fogger, just because it doesn't work well with anything but the smallest wick. 

I'm sure someone with more knowledge on the subject will be able to advise further...

thanks ion i heard theres a dripper with a resevoir that holds extra juice, i will look into the expromiser i've just made a 1.6ohm coil in my aga t2 with a 2ml air hole creates clouds of vaper but zero flavour. cant seem to get the combo right.
seen a review of a russian dripper with 4 coils and cotton .3ohm masses of vaper. might try that

[kalbo]

The Magma holds a lot of juice for a dripper.

[blanco]

after watching todds review on the magma i think i will buy 1 cheers kalbo

[spikus]

If your gonna sub ohm drippers are normally the way you should go .... But the Aqua is designed for dual coils and is probably the best non dripping attie for sub ohming ... FT sell a clone that's cheap as chips ... You can sub ohm on kayfuns etc but they aren't designed for multiple coils and increased airflow

[enjay]

Apr 4, 2014 21:09:06 GMT spikus said:

You can sub ohm on kayfuns etc but they aren't designed for multiple coils and increased airflow

We shall see lol, probably single coil but the air hole WILL be improved lol

[virus2k]

I am currently running 0.9ohm on my expromizer/nemi build and its freaking fantastic.
got it in 18350 mode aswell with a kick module set to 13w and the vapor and flavor is out of this world.
eset imr 18350 800mah bats work perfectly fine and are capable of sub ohm but i would advise if you are using these batteries ect to go no lower than 0.7ohms with them.... or you could have a accident.

speaking of batteries ect im going to get some vtc5 sonys if can find them and peeps are right the juice holes and well is very efficient on this atty for sub ohms. no dry hits and full flavor and vapor......

The reason i am using a kick module is that this kick module i have gives me a full 13w and does not let me completely drain the battery i have it will stop firing automatically when the batt gets down to 2.7v as the discharge safety limit for these batteries is 2.5v. another + is that you have some safety features with this setup

[blanco]

thanks all, i gonna get a magma rda, and set up with 2 x 1.8 ohm coils giving me about 0.9to1ohm
on a stingray with a kick2 and some efest 18650 pa35a batteries(purple ones). must stop spending money!!!!!!!!!!!!!!!!!!!

[Deleted]

Apr 4, 2014 19:04:37 GMT blanco said:

after watching todds review on the magma i think i will buy 1 cheers kalbo

There's not many in stock around at the moment.

These did have some: www.midlandsvaping.co.uk/-pre-order-coming-soon/153-magma-atomizer.html

also another one to perhaps consider which I have tried without luck to get is:

shmovapes.co.uk/home/76-origen-dripper-v2-by-norbert.html

[blanco]

its out of stock everywhere i've looked, i believe they recalled them due to the short 510 threading and i think theres a v2 out but cant find one, theres no rush as the efest 35amp batteries are hard to find too

[Deleted]

Apr 5, 2014 12:08:00 GMT blanco said:

its out of stock everywhere i've looked, i believe they recalled them due to the short 510 threading and i think theres a v2 out but cant find one, theres no rush as the efest 35amp batteries are hard to find too

Yes the efest purples don't hang around long for sure. I did a search and see these:

www.juicemeup.co.uk/index.php?route=product/product&product_id=97

never used them though.

I used p-vaper but he's out now too.

[blanco]

cheers zero i'm waiting for vapegeek to get some in

[kalbo]

Apr 5, 2014 12:27:28 GMT @zero said:

Apr 5, 2014 12:08:00 GMT blanco said:

its out of stock everywhere i've looked, i believe they recalled them due to the short 510 threading and i think theres a v2 out but cant find one, theres no rush as the efest 35amp batteries are hard to find too

Yes the efest purples don't hang around long for sure. I did a search and see these:

www.juicemeup.co.uk/index.php?route=product/product&product_id=97

never used them though.

I used p-vaper but he's out now too.

Absy's got the 35A Efest batteries. He's going away again next week though so if you want some give him a quick message. [e-mail]