Well I suck at microcoils

[Super-Shiny]

collie2011

Two set ups here.

Using 0.25 Kanthal:



Using 0.27 Kanthal:

[collie2011]

Thank you Super-Shiny you are a superstar as always :-)

Sent from my Nexus 7 using proboards

[Super-Shiny]

Apr 12, 2014 18:08:24 GMT collie2011 said:

Thank you Super-Shiny you are a superstar as always :-)

Sent from my Nexus 7 using proboards

Your welcome, just for info i find 0.25 the best all rounder for most atties.

[chykensa]

Just bought some .32 Kanthal and a couple of M3 screws, and 8 wraps on a microcoil give me 1.5ohm - great in my Russian on the Caravela, and because the wire is so sturdy, much easier to work with too.

[collie2011]

Yeah the .2 was quite springy even after firing it. I used one of those blowtorch lighters. The Mr wouldn't trust me with the proper blowtorch lol, I did set my plaster on fire though so I can see why lol.

Sent from my Nexus 7 using proboards

[Greigster]

I use .32 Kanthal for all my coils now and for me, 10 wraps around a 1.5mm. drill bit gives me about 1.3ohms and fits very nicely in the Aerotank.

[chykensa]

collie2011 - that wire (20+ metre on a spool) cost me about £6 delivered from The Vape Mesh Company. That's one hell of a lot of microcoils, bearing in mind that one coil lasts me about 3 weeks on average!!

[Greigster]

Apr 12, 2014 19:05:45 GMT chykensa said:

collie2011 - that wire (20+ metre on a spool) cost me about £6 delivered from The Vape Mesh Company. That's one hell of a lot of microcoils, bearing in mind that one coil lasts me about 3 weeks on average!!

Just done a few calculations, that will make you 149 years of age by the time you need to order another spool.

[collie2011]

I've seen the Vape mesh company mentioned a few times, they are only 2 or 3 miles from me, wonder if they'd let me go pick it up haha.

Sent from my Nexus 7 using proboards

[Greigster]

Apr 12, 2014 19:08:56 GMT collie2011 said:

I've seen the Vape mesh company mentioned a few times, they are only 2 or 3 miles from me, wonder if they'd let me go pick it up haha.

Sent from my Nexus 7 using proboards

Go and have a sneaky peek in their bins after dark

[enjay]

I'm sure it's 10 wraps of .32mm on a 1.6mm 14 gauge needle that I use for the ladies evod, protank type coil heads. 1.7ohms, spot on for the evod imo. I use .32 and .34 exclusively these days for everything.

[tomj777]

Apr 12, 2014 19:08:56 GMT collie2011 said:

I've seen the Vape mesh company mentioned a few times, they are only 2 or 3 miles from me, wonder if they'd let me go pick it up haha.

Sent from my Nexus 7 using proboards

Brilliant company (what is it about vaping companies... So few bad ones :-))

No act of kindness, however small, is ever wasted