After some advice on what to buy please.

[davemorton]

I currently use a zmax, but with the impending bans that are being talked about, and my ability to break anything electronic, I thought I best start looking at a mechanical mod and a rebuild-able Atomizer so if ever they stop selling CE5's, I will still be able to vape. Only problem is, I am clueless Will a mechanical mod give as good a vape as the zmax, and is it possible for a complete bafoon to re-wick an atomizer?

So, the mechanical mods I think I have narrowed it down to (but am definitely open to other suggestions)...

Nemesis clone from fasttec www.fasttech.com/product/1448300-nemesis-style-mechanical-mod

I will also get a kick from fasttech, but which one would people advise please?

www.fasttech.com/product/1501000-variable-wattage-kick-module-for-mechanical-mod-pv
www.fasttech.com/products/0/10006524/1646300-variable-voltage-kick-module-for-mechanical-mod

Next is the rebuild-able Atomizer which I really dont have a clue about. So long as it gives a good vape, and is not too hard to rewire, then I am okay with it. I have seen this one, but is it any good?
www.fasttech.com/products/1411/10006473/1605200-kayfun-lite-styled-rebuildable-atomizer-4-5ml

And finally...what else do I need to buy to rewire the rebuild-able Atomizer?

Sorry for all the questions, and thanks for taking the time to read it.

[djs]

While you are looking on fasttech, have a look at these

www.fasttech.com/products/1591806

I bought 1 pack (50 of them) and they work in Kanger clearomisers. If the vaping scene gets "difficult" in 2016, I'll be using Kayfun/Taifun rebuildables and also using these for "out and about" vaping. There's also the make your own wire and cotton wool for any sort of atomizer.

If 2-3ml clearomisers do get banned (which is possible) and rebuildable CE5s/Kangers/Novas also get hit, I'll be glad of what I have.
I can see me buying 1,000 of those pre-mades. Why not?.... cheap as anything and better than a Kanger from a packet.

[djs]

Oh, and go for the Variable Watt kick if you have the choice.

That Nemesis is fine too.

[enjay]

I'd try and get the hcigar nemesis, it's a cracking clone, hits harder than the genuine one. That with the kayfun lite + is just perfection. It's what I use all day every day.

A bit of practice coiling but it's not to hard and once you find your favourite set up it's bliss.

[geordie_vaper]

it hits harder then the real one? how come?

[babs]

I use these pre-coiled wires with cotton wool £1.29 for 50 www.fasttech.com/products/1611705 in protank minis and rgm2's they work a treat no messing with wire takes just a few minutes.

[enjay]

Apr 21, 2014 22:28:25 GMT geordie_vaper said:

it hits harder then the real one? how come?

Who knows, there's a few vids on YT of people reviewing it and they end up a bit taken aback seeing as they have a genuine one lol. It has less of a voltage drop than the genuine one for some reason.

[sloppyvape]

Ive not got much of a clue on the clone stuff out there as ive always bought the real thing,Mainly for the build quality and the materials they use.

But if you wanted to spend some dosh on somethink thats going to last and look the part and easy to set up i still think the provari with a kayfun lite + is the dogs dinkles mate.Both are built solid ,the provari has the stats to match just about anythink new out there and the kayfun is solid and so simple to rebuild all youll need then is a load of 2mm silica wick and a roll of .20mm or .25mm kanthal A wire. Or forget about the silica and make micro coils and use organic cotton wool ,no need to be worried theres loads of videos on utube on how to set these up.
And when your provari looks a bit worn you can get these for it ....











geordie might change his mind after seeing these lol

[Deleted]

I am the 'mod destroyer' davemorton. Others might argue in favour of other mods but I love the magneto (there are only two types of vapers - nemesis vapers and magneto vapers). I think safercigs in dorset is about the cheapest place UK wise (don't forget the discount code). I've dropped it down a gutter (praise God a car didn't run over it )...shorted it. It's survived things $150 mods didn't. Parts are easy to get hold of as well. tis telescopic . Fab mod. Had it since January (now have 3)...only probs was (a) someone nicking one and (b) the switch going which I'm waiting on magnets from ebay to hopefully fix (just with wear and tear). Yes you can have probs with the switch and it constantly firing with it unscrewing but pbusardo has a good vid on that (once you've done it a few times it's easy peasy)

As for atomisers. I'm more than happy microcoiling a protank2/davide mega (not king)....again cheap as chips and works

Re bans. Chill man - they've banned it in Canada and there are still lots of vapers - nothing to worry about

[geordie_vaper]

R2D2 provari!! that looks amazing, and its to late know struck a deal last night, i may get another one at somepoint through the journey

[sloppyvape]

yeh there j-wraps ,dont cost that much and you wrap your worn looking provari with it.

mind you when it comes to vaping kits we all have a budget to stick to ..i just done a ton of hours to get all my stuff in lol

[sloppyvape]

theres always little gems around like this one :

ukvapers.org/Thread-For-Sale-Provari-2-5-with-extras

on top of that put on rmsd , near 200 quid on his part.

always good to see when he bought itso you know how much warrenty is left

[davemorton]

Very nice Sloppy, but a bit out of my price range

[Deleted]

Stingray mod , looks lovely , got in my opinion a better switch then the nemesis , looks lovely , looks lovely .