why dose the battery sometime flood

[halight]

Hi all,
I'm.using a vision spinner with a evod, sometimes towards the end of the juice in the tank the top of the battery will flood with juice and the evod will start to gurgul. Could someone please tell me why this happens ?

Thanks in advance 

[enjay]

It's a common one with those type of heads, protanks, evods etc, they all suffer the same issue. Personally I rebuild them a different way which seems to stop it happening, only other option is to take it off and clean things out when it starts to happen.

Here's my method

allaboute-cigarettes.proboards.com/thread/38927/protank-evod-coil-silica?page=1&scrollTo=685104

[halight]

Thanks for the link to your thread.

[Greigster]

With these tanks, it is better to top up before you get down to 1/3 level due to any temperature rise having a greater pressure effect on the air in the tank compared to juice in the tank.
The more juice in the tank, the less it is effected by temperature fluctuations.

[cHooBeyDoo]

Hi halight i've heard it's something to do with the air pressure inside the tank once it gets below 1/3 or 1/4 full. Someone here more in the know might give a better answer.

I get a bit of leakage too when it reaches that sort of level on my Mini Protank 2 and Protank 2 using stock coil heads, similar to evods I think, personally I think it's the wick setup on them.

I don't get as much trouble with the used heads i've re-coiled myself by using microcoil and cotton wool, just more condensation problems mainly.

Edit: Greigster beat me to it

[halight]

May 10, 2014 19:29:29 GMT Greigster said:

With these tanks, it is better to top up before you get down to 1/3 level due to any temperature rise having a greater pressure effect on the air in the tank compared to juice in the tank.
The more juice in the tank, the less it is effected by temperature fluctuations.

Thanks for that info. Always helps to know why these things happen.

I'm ok with it. I u e  cotton bud to give it a quick clean. I want to have a go at 'recoiling I have also been given a Gt Rba that I would like to learn how to use and coil. Need to get a multimeter first and then I will give the evods a go first. I have some youtube vids saved too watch on both. All that's on my things to do list. So will get around to at some point. 

[halight]

May 10, 2014 19:34:14 GMT cHooBeyDoo said:

Hi halight i've heard it's something to do with the air pressure inside the tank once it gets below 1/3 or 1/4 full. Someone here more in the know might give a better answer.

I get a bit of leakage too when it reaches that sort of level on my Mini Protank 2 and Protank 2 using stock coil heads, similar to evods I think, personally I think it's the wick setup on them.

I don't get as much trouble with the used heads i've re-coiled myself by using microcoil and cotton wool, just more condensation problems mainly.

Edit: Greigster beat me to it

Thanks for your post too. The only way us newbies learn is when others are willing to take there time to tell/show us.

I tell you what I've ended up taking up a whole new hobby with this vapeing! Not that I regreat it. Just wish I had more money at the moment.