Celebrating my 1st spend free month in years

[ionian]

My spending has certainly slowed up over the past couple of months, but I don't mix so there's always juice to buy. Like you I'm really happy with the gear I have already, so there's not much that's needed.

I half expected this thread to be "I've not spent anything for a month, what should I buy to celebrate?"

[VapingBad]

May 31, 2014 21:03:22 GMT 300 said:

Nothing wrong with knowing what you like & sticking to it.

Different to you i don't have many duplicates but i do have quite a few similar style atties that i know work well for me.

Similar to you i have lots of batteries spare chargers & supplies, could prolly last till Christmas for concentrates & beyond for everything else

I haven't closed my mind to new stuff and would try new dual wick genesis with air-flow control, but have not seen anything that would be a step up form the Kraken design, the other tanks are just for where I don't want to take a genesis. Tried lots of drippers, but not into clouds and just prefer the flavour of the genesis. Having more than one of your favourite rebuildables allows me to rebuild ahead of time or have different wick & coil set up for different situations, plus I can leave the washing up to pile up. That many kayfun clones is because 4.5 ml tanks will be caught by the TPD and they were so cheap £9.14 each the last two.

[300]

May 31, 2014 21:42:22 GMT ionian said:

I half expected this thread to be "I've not spent anything for a month, what should I buy to celebrate?"

Haha, it wouldn't be the first time i've read that headline!

[300]

May 31, 2014 21:52:06 GMT VapingBad said:

May 31, 2014 21:03:22 GMT 300 said:

Nothing wrong with knowing what you like & sticking to it.

Different to you i don't have many duplicates but i do have quite a few similar style atties that i know work well for me.

Similar to you i have lots of batteries spare chargers & supplies, could prolly last till Christmas for concentrates & beyond for everything else

I haven't closed my mind to new stuff and would try new dual wick genesis with air-flow control, but have not seen anything that would be a step up form the Kraken design, the other tanks are just for where I don't want to take a genesis. Tried lots of drippers, but not into clouds and just prefer the flavour of the genesis. Having more than one of your favourite rebuildables allows me to rebuild ahead of time or have different wick & coil set up for different situations, plus I can leave the washing up to pile up. That many kayfun clones is because 4.5 ml tanks will be caught by the TPD and they were so cheap £9.14 each the last two.

I hear what you're saying about the TPD, i expect my RBA's to last a lifetime with little maintainance & either a few spares or a little improvisation required

[Super-Shiny]

May 31, 2014 21:17:25 GMT 300 said:

May 31, 2014 20:43:31 GMT Super-Shiny said:

Go for it 300

Nothing better than looking at the end product you made.

I'm thinking something like a Shield Mod with an SX350 board might be good, could be more work than my buddy would be prepared to take on though.

I am in the process of doing my last and only box mod: allaboute-cigarettes.proboards.com/thread/40527/last-box-mod-build?page=1

The SX350 chip is a blessing, already wired up and has updates via USB

[300]

Jun 7, 2014 17:05:46 GMT Super-Shiny said:

May 31, 2014 21:17:25 GMT 300 said:

I'm thinking something like a Shield Mod with an SX350 board might be good, could be more work than my buddy would be prepared to take on though.

I am in the process of doing my last and only box mod: allaboute-cigarettes.proboards.com/thread/40527/last-box-mod-build?page=1

The SX350 chip is a blessing, already wired up and has updates via USB

Looks easy with this chip, my only stumbling block is the enclosure, would like it to be at best... something unique, or at least... a little different.

[Super-Shiny]

Jun 7, 2014 17:10:16 GMT 300 said:

Jun 7, 2014 17:05:46 GMT Super-Shiny said:

I am in the process of doing my last and only box mod: allaboute-cigarettes.proboards.com/thread/40527/last-box-mod-build?page=1

The SX350 chip is a blessing, already wired up and has updates via USB

Looks easy with this chip, my only stumbling block is the enclosure, would like it to be at best... something unique, or at least... a little different.

That's the hardest part, getting something that all parts will fit, couple of mm out and you are fooked, best thing to do is decide on parts and get the measurements and then look around for a box that them parts will fit into........think i have seen some members on here who can carve up a bit of wood, maybe lash151 can as he has some fantastic wooden mech mods that he made.

[lash151]

Jun 7, 2014 17:15:00 GMT Super-Shiny said:

Jun 7, 2014 17:10:16 GMT 300 said:

Looks easy with this chip, my only stumbling block is the enclosure, would like it to be at best... something unique, or at least... a little different.

That's the hardest part, getting something that all parts will fit, couple of mm out and you are fooked, best thing to do is decide on parts and get the measurements and then look around for a box that them parts will fit into........think i have seen some members on here who can carve up a bit of wood, maybe lash151 can as he has some fantastic wooden mech mods that he made.

Ha ha... I have box mod on my drawing board now... but no time to do it!  What type of thing are you making?