Looking for advice on a RBA or RDA

[Super-Shiny]

As the header suggests i am looking for a RBA for it's sole purpose to be used on my box mod i am making.

Features i am looking for:

Must be 22mm....no less no more
Satin/Brushed/Chrome finish
Holds a minimum of 1.8ml
Don't care if it's a dripper as long as it can hold atleast 1.5ml as i don't want to drip liquid every two minutes
Preferably with 2 posts for dual coil or something that has 1 post but does not have room problems for dual coils
As small in height as possible
No faffing around trying to stop leaks and whistling noises
Clone or Genuine.........don't care as long if it is a clone it's a decent made one
Preferably something without names plastered all over it
MUST be able to take microcoil and cotton.....not a pure silica atty...cannot use silica

Don't want a genuine Kayfun Lite as i just didn't get along with them but i have seen somewhere about the Kayfun v2 which has bigger channels, maybe a option?

Very important: Not FT or abroad, something that i can buy in the UK

Your thoughts most welcome



Fussy git ain't i

[ionian]

3D dripper would be my first choice -clones are available in the uk, you could probably pick one up in the classifieds for £20 odd. Holds at least 2ml, dual coils, great vape. The air holes are small, so it's not for lung inhales, but great as a leisurely vape. It's a faff to fill properly, but there are quick methods.

If not, the heron clone will be available in the UK in a couple of weeks - it looks the business.

[Super-Shiny]

I looked at that 3D Dripper ionian just don't like the filling and mainly the ghastly 3D logo on it, that logo makes me

I have been looking at this: Clicky just don't know much about it and how much it holds.

[Ripshod]

It's an RDA SS, you want an RBA with a tank methinks?

[Super-Shiny]

Jun 6, 2014 17:24:35 GMT Ripshod said:

It's an RDA SS, you want an RBA with a tank methinks?

Rebuildable Atomizer or Rebuildable Dripper....what ever fits the requirements.

[Ripshod]

yh, you want a tank. You don't want a dripper unless it has a tank option. I'm not too hot on them but your best option would probably be a kayfun/Russian clone. I've just taken a stab in the dark on size, and bought a EHPRO KFL v2 RBA second hand.

Best person for advice would be chykensa

[ionian]

Jun 6, 2014 17:19:20 GMT Super-Shiny said:

I looked at that 3D Dripper ionian just don't like the filling and mainly the ghastly 3D logo on it, that logo makes me

I have been looking at this: Clicky just don't know much about it and how much it holds.

The filling is easily fixed - you can hold it down and pour juice in the well, then release and it sucks it all down. No need to fiddle with the screw. The logo is ugly though, I can't argue with that. I have the yesmo version and I'm pretty sure it'll sand off, but I don't want to try on mine!

i don't have an Origen but I've heard good things about it. It has a deep well, but I'd be immensely surprised if it holds 1.5ml. 

Still think the heron might be a goer, but it's a wait. Maybe get the Origen and the heron? 

[geordie_vaper]

you could use a kayfun as a tank rba and if you fancied a change as a dripper aswell

edit if you got a nano kit aswell it would be small ish

[Deleted]

Take your pick Super-Shiny .... plenty of 22mm atties here docs.google.com/spreadsheet/ccc?key=0AjJFJFwjTejRdG9xMHB5SVlBSFJGRWJIY0YwalJRd0E#gid=0

[Super-Shiny]

Jun 6, 2014 17:32:11 GMT ionian said:

Jun 6, 2014 17:19:20 GMT Super-Shiny said:

I looked at that 3D Dripper ionian just don't like the filling and mainly the ghastly 3D logo on it, that logo makes me

I have been looking at this: Clicky just don't know much about it and how much it holds.

The filling is easily fixed - you can hold it down and pour juice in the well, then release and it sucks it all down. No need to fiddle with the screw. The logo is ugly though, I can't argue with that. I have the yesmo version and I'm pretty sure it'll sand off, but I don't want to try on mine!

i don't have an Origen but I've heard good things about it. It has a deep well, but I'd be immensely surprised if it holds 1.5ml. 

Still think the heron might be a goer, but it's a wait. Maybe get the Origen and the heron? 

Not to sure about the Heron, i think if i was to get one i would have to buy a genuine and that is costly atm, plus preferably something with 2 posts for dual coil............maybe blakey can advise on the capacity of the Origin.

[Super-Shiny]

So far with a lot of looking around the only ones that are catching my eye is:

Origen v2 (depends on how much it holds)

Kayfun v2 (due to having bigger juice chambers, shame it's only 1 post, will be a bigger shame if it whistles as i would through that right out the window - don't want a faffing RBA)

[ionian]

Fogger v4?



Dual coil, 22mm, adjustable airflow, a bit big but not unattractive, but it is a fogger.

[Super-Shiny]

Jun 6, 2014 18:09:03 GMT ionian said:

Fogger v4?



Dual coil, 22mm, adjustable airflow, a bit big but not unattractive, but it is a fogger.

Way to tall/big..............told ya.........fussy git

Want something small and stumpy with all the specs i mentioned above ............... i know i know i am looking for the best of both worlds but i am sure there is something out there

[chykensa]

Jun 6, 2014 17:30:58 GMT Ripshod said:

yh, you want a tank. You don't want a dripper unless it has a tank option. I'm not too hot on them but your best option would probably be a kayfun/Russian clone. I've just taken a stab in the dark on size, and bought a EHPRO KFL v2 RBA second hand.

Best person for advice would be chykensa

Ripshod - you are very kind to tag me, but I'm still learning from the Vapeworld Grand Master Super-Shiny!! He has forgotten more about vaping, coiling, wicking, rebuildables, etc. than I have learned so far!!

[Deleted]

Rose
Right if you want a tank atty that will blow you away then it has to be the Rose v2.
Since I bought one I have not used anything else. It beats everything else on the market and is made in the UK by two guys who are vapers themselves.
They looked at all the good bits of lots of other atties and have combined them in one really well made tank.
It has easily adjustable air flow, adjustable juice control by just turning the drip tip, can be recoiled without emptying the tank, is easy to refill and is a doddle to coil either single or duel.
Comes well packaged with spares.
Yes its a £130 but its the best £130 ive ever spent on an atty, nothing else out thier can touch it.