Looking for advice on a RBA or RDA

[Super-Shiny]

Jun 6, 2014 18:36:42 GMT @windows said:

Rose
Right if you want a tank atty that will blow you away then it has to be the Rose v2.
Since I bought one I have not used anything else. It beats everything else on the market and is made in the UK by two guys who are vapers themselves.
They looked at all the good bits of lots of other atties and have combined them in one really well made tank.
It has easily adjustable air flow, adjustable juice control by just turning the drip tip, can be recoiled without emptying the tank, is easy to refill and is a doddle to coil either single or duel.
Comes well packaged with spares.
Yes its a £130 but its the best £130 ive ever spent on an atty, nothing else out thier can touch it.

Had one, sold it, didn't like it, plus it does not come close to what i am looking for.

[Deleted]

Think you must be looking for something thats not been invented yet then lol

[Perpetua]

Do any of the IGO's fit the brief Rom? They're pretty basic RDA's . . . but you could probably modify air holes and stuff if they weren't to your exact liking.

[Super-Shiny]

Jun 6, 2014 18:42:10 GMT @windows said:

Think you must be looking for something thats not been invented yet then lol

Hence the thread

There is something out there, just gotta find it, hence me asking members....saves me buying and going through all the attys out there to find the right one

[Super-Shiny]

Jun 6, 2014 18:44:27 GMT Perpetua said:

Do any of the IGO's fit the brief Rom? They're pretty basic RDA's . . . but you could probably modify air holes and stuff if they weren't to your exact liking.

I have looked at them but finding something wrong with each one of them, that's the problem with what i want, it's very specific........ So far the only ones catching my eye is the Kayfun v2 (clone) and the Origen v2 (just don't know how much juice it can really hold)

[Deleted]

Jun 6, 2014 18:46:12 GMT Super-Shiny said:

Jun 6, 2014 18:42:10 GMT @windows said:

Think you must be looking for something thats not been invented yet then lol

Hence the thread

There is something out there, just gotta find it, hence me asking members....saves me buying and going through all the attys out there to find the right one

Well ive been looking for weeks and everything I thought looked promising turned out to have some sort of niggly problem after researching it. Given up now after trying all the ones that others rave about, they were all hyped up.
Ps I have a genuine Origen v2 and it holds loads of juice but is a right pain in the arse to set up.

[Super-Shiny]

@windows judging by your signature maybe you can answer the question, how much juice does the Origen v2 hold?

[Perpetua]

Jun 6, 2014 18:49:03 GMT Super-Shiny said:

Jun 6, 2014 18:44:27 GMT Perpetua said:

Do any of the IGO's fit the brief Rom? They're pretty basic RDA's . . . but you could probably modify air holes and stuff if they weren't to your exact liking.

I have looked at them but finding something wrong with each one of them, that's the problem with what i want, it's very specific........ So far the only ones catching my eye is the Kayfun v2 (clone) and the Origen v2 (just don't know how much juice it can really hold)

Fair enough Rom . . . just choose something that holds it's resale value well then.

[ionian]

Have you thought about a genesis set up, with a cotton wool build like this?

It'll open up a load of other options...

[Deleted]

Jun 6, 2014 18:54:05 GMT Super-Shiny said:

@windows judging by your signature maybe you can answer the question, how much juice does the Origen v2 hold?

Its prob about a couple of mil as it has a really deep juice well that you can pack loads of cotton in.

[Super-Shiny]

Jun 6, 2014 18:58:42 GMT @windows said:

Jun 6, 2014 18:54:05 GMT Super-Shiny said:

@windows judging by your signature maybe you can answer the question, how much juice does the Origen v2 hold?

Its prob about a couple of mil as it has a really deep juice well that you can pack loads of cotton in.

Sounds perfect, it's...........

22mm
Holds no less than 1.5ml
Two posts for dual coil
Can accommodate microcoil and cotton
Not plastered with names on it
Nice small size

Only question is, how does it vape? is it faff free?

[Greg]

How about a kayfun clone with four juice channels. I think it was mvapes that was doing them but then they reverted to the 1:1 clone. Maybe someone else does them or drop him a PM, might be able to source one.

[Deleted]

The problem ive found is everyones opinion is is objective. I have found that what someone else thinks is great turns out to be a pile of crap.
My most recent example was the Zenith v2. Everywhere was ranting on how great it was so I spent 70 and bought one, what a disappointment. The draw was so airy even on its tightest setting, I hated it. Looked great, but I still hated it lol.
The only other tank that I wouldnt part with is my Kraken, it vapes like a dripper with a tank on the bottom.

[Deleted]

Jun 6, 2014 19:06:05 GMT Super-Shiny said:

Jun 6, 2014 18:58:42 GMT @windows said:

Its prob about a couple of mil as it has a really deep juice well that you can pack loads of cotton in.

Sounds perfect, it's...........

22mm
Holds no less than 1.5ml
Two posts for dual coil
Can accommodate microcoil and cotton
Not plastered with names on it
Nice small size

Only question is, how does it vape? is it faff free?

Vapes really well. Setting up vertical coils can be a bit of a faff if you have sausage fingers and bugger eyes like me. My only criticism of it is that the negative posts are a little too close to its raised edge so if you dont have them wound right out it can be a pain to get your wire under them.
Really good point for it is loads of options on airflow and looks tidy.

[Super-Shiny]

Jun 6, 2014 19:14:40 GMT @windows said:

Jun 6, 2014 19:06:05 GMT Super-Shiny said:

Sounds perfect, it's...........

22mm
Holds no less than 1.5ml
Two posts for dual coil
Can accommodate microcoil and cotton
Not plastered with names on it
Nice small size

Only question is, how does it vape? is it faff free?

Vapes really well. Setting up vertical coils can be a bit of a faff if you have sausage fingers and bugger eyes like me. My only criticism of it is that the negative posts are a little too close to its raised edge so if you dont have them wound right out it can be a pain to get your wire under them.
Really good point for it is loads of options on airflow and looks tidy.

Cheers, sounds good, i don't mind the coiling side of things just don't want something that i have to put onto a operating table before it works

Still looking at the Kayfun v2 due to bigger chambers as i find that was Kayfuns downfall for me (juice depending).

So far the Origen v2 and Kayfun v2 is still on the table.