HANAA on focal 30W £33 18650, in stock, new pics :) received

[Bluefish]

Jul 17, 2014 11:33:31 GMT robby said:

Foclecig

Wow, that is all, lol

[boyofford]

Jul 19, 2014 23:26:17 GMT dalealan said:

Jul 19, 2014 23:22:12 GMT boyofford said:

I need to get myself one cloud chasing dripper just for entertainment. Still not sure what, have mostly tended to go for flavour first with my drippers.
Did try drilling air on one rda but drill bit broke so large hole on one side and not on other!

Just sold my castle rda as felt it really worked best at lower ohms than I cared for, and was not pocket friendly but that's not relevant ..... Got sellers remorse now, could of found a sweet spot with variable watts I reckon.

I was considering a magma clone from fasttech. Seem to get favourable reviews and robby likes them but thought I'd try something cheap and cheerful first to see if it's for me.

To be honest that might not be a fair test of if it's worth dripping.
Flavour does vary, along with density and heat with drippers.
Of course the coil makes a huge difference too.

I started dripping with trident clone, thought it was pretty good, small clouds and more density at ohms I was doing.
Then saw a origen clone in classifieds and bought it.
Difference was massive, loads more flavour, this is what got me hooked!

Orieco was my next, subtly different, but similar.

Then the castle, which I never really took too.

Then another origen v1/v2 mashup clone which is pretty good.

Never tried the igo, which much be great, but point is try some of other stuff too....though guessing you will anyhow as contemplating another 30 watter!

Thinking of getting a black magma from fasttech to go with black ipv. Looks to be one of the easier ones to build....all my favourites I use vertical builds with so outside of coil is completely exposed and sucks juice up from well.

[dalealan]

Yeah I thought I'd just get the igo as a learning dripper as it seems a doddle to coil and it won't break the bank while I'm learning. There's loads of stuff I've got my eye on but I'll wait to see how I get on with it got to admit the bairns mvp is quite cute. I've stuck with egos as they're spot on for work as they're easily hidden and if I bust one it's no biggie.

[robby]

Jul 19, 2014 23:26:17 GMT dalealan said:

Jul 19, 2014 23:22:12 GMT boyofford said:

I need to get myself one cloud chasing dripper just for entertainment. Still not sure what, have mostly tended to go for flavour first with my drippers.
Did try drilling air on one rda but drill bit broke so large hole on one side and not on other!

Just sold my castle rda as felt it really worked best at lower ohms than I cared for, and was not pocket friendly but that's not relevant ..... Got sellers remorse now, could of found a sweet spot with variable watts I reckon.

I was considering a magma clone from fasttech. Seem to get favourable reviews and robby likes them but thought I'd try something cheap and cheerful first to see if it's for me.

It`s only a tenner you tight wad

[robby]

The Magma has just about the best flavour I have ever had from a dripper. I am using premade coils from FT and organic yarn which fits the coils just perfectly with no alteration required. It wicks really well. Hassle free flavour heaven

[Bluefish]

If you are chasing the flavour, it may be time to change the juice, even on a normal setup sometimes you have too much flavour.

[boyofford]

Jul 20, 2014 0:08:46 GMT robby said:

Jul 19, 2014 23:26:17 GMT dalealan said:

I was considering a magma clone from fasttech. Seem to get favourable reviews and robby likes them but thought I'd try something cheap and cheerful first to see if it's for me.

It`s only a tenner you tight wad

Lol..tenner is expensive then, but up for getting two dna clones!

Didnt think of that.

[dalealan]

Jul 20, 2014 0:08:46 GMT robby said:

Jul 19, 2014 23:26:17 GMT dalealan said:

I was considering a magma clone from fasttech. Seem to get favourable reviews and robby likes them but thought I'd try something cheap and cheerful first to see if it's for me.

It`s only a tenner you tight wad

Yup but it's dual coil so I'm gonna try a cheap single coil one first to see if I can get the hang of this dripping malarkey and to try coiling and if it's easy enough would an rba maybe be better as I'd be using it for work too, it seems an easy one to learn on. So there  Tease-smileyHahaha ooh robby did you see my question earlier about the charging led thingy?

[robby]

Jul 20, 2014 7:24:28 GMT dalealan said:

Jul 20, 2014 0:08:46 GMT robby said:

It`s only a tenner you tight wad

Yup but it's dual coil so I'm gonna try a cheap single coil one first to see if I can get the hang of this dripping malarkey and to try coiling and if it's easy enough would an rba maybe be better as I'd be using it for work too, it seems an easy one to learn on. So there  Tease-smileyHahaha ooh robby did you see my question earlier about the charging led thingy?

But it doesn`t have to be dual coil Tight Wad there are three sets of holes on the cap so you can block one side off and turn it into a single coil atty 

[robby]

Jul 19, 2014 21:02:53 GMT dalealan said:

Been thinking about grabbing one from fasttech too. Looks like a hotcig clone as opposed to the ksd ones (no wells leading upto the 510 connector to aid airflow) Full range of colours and supposedly ships with an efest battery but there's complaints that it's a fake so I'd be discarding it anywho. Not sure why they don't offer them without the battery as it would aid shipping. Grrrr. Does yours have a lil hole beside the charging port with a charging led robby can't see any on the focal pics? www.fasttech.com/product/1740403

And bigger pics www.fasttech.com/forums/1740403/t/1329258/v3-vs-v2-photos

No it doesn`t have a hole in it for the led, but the led is there and working but it`s in stealth mode You can see a glow around the USB plug when it is in use

[dalealan]

Jul 20, 2014 9:24:18 GMT robby said:

Jul 20, 2014 7:24:28 GMT dalealan said:

Yup but it's dual coil so I'm gonna try a cheap single coil one first to see if I can get the hang of this dripping malarkey and to try coiling and if it's easy enough would an rba maybe be better as I'd be using it for work too, it seems an easy one to learn on. So there  Tease-smileyHahaha ooh robby did you see my question earlier about the charging led thingy?

But it doesn`t have to be dual coil Tight Wad there are three sets of holes on the cap so you can block one side off and turn it into a single coil atty 

You told me it did have to be dual coil earlier. Right go and sit on the naughty step robby hahaha

[dalealan]

Jul 20, 2014 9:26:46 GMT robby said:

Jul 19, 2014 21:02:53 GMT dalealan said:

Been thinking about grabbing one from fasttech too. Looks like a hotcig clone as opposed to the ksd ones (no wells leading upto the 510 connector to aid airflow) Full range of colours and supposedly ships with an efest battery but there's complaints that it's a fake so I'd be discarding it anywho. Not sure why they don't offer them without the battery as it would aid shipping. Grrrr. Does yours have a lil hole beside the charging port with a charging led robby can't see any on the focal pics? www.fasttech.com/product/1740403

And bigger pics www.fasttech.com/forums/1740403/t/1329258/v3-vs-v2-photos

No it doesn`t have a hole in it for the led, but the led is there and working but it`s in stealth mode You can see a glow around the USB plug when it is in use

Cheers robby I like the airflow grooves in this one but I like the colours of the fasttech ones as it looks like they use exactly the same chips... There's only one way to solve this... FIGHTTTTT!!

[robby]

Nothing to stop you putting a small hole in the same position as in the other clone

[BigG]

How long does stuff tend to take to arrive from china? been a long time since iv bought any gear from there and there tracking checker doesnt seem to work.

[teethcv]

I got mine this morning and it's the best mod I got hands down and trust me I have a lot lol so to anyone thinking about getting one go for it