HANAA on focal 30W £33 18650, in stock, new pics :) received

[dalealan]

Jul 15, 2014 11:52:05 GMT robby said:

First worry was the resistance reading on these, but mine is spot on. I have a couple of 1 ohm high stability 10 watt resistors in series on an atty and they ARE reading 2.0 ohms

Can you lock the voltage/wattage in and put it in stealth mode like the original robby Sure I read somewhere that this wasn't available on the ksd one??

[robby]

Jul 15, 2014 12:00:39 GMT dalealan said:

Jul 15, 2014 11:52:05 GMT robby said:

First worry was the resistance reading on these, but mine is spot on. I have a couple of 1 ohm high stability 10 watt resistors in series on an atty and they ARE reading 2.0 ohms

Can you lock the voltage/wattage in and put it in stealth mode like the original robby Sure I read somewhere that this wasn't available on the ksd one??

havent got that far yet mate 

[boyofford]

Jul 15, 2014 12:03:42 GMT robby said:

Jul 15, 2014 12:00:39 GMT dalealan said:

Can you lock the voltage/wattage in and put it in stealth mode like the original robby Sure I read somewhere that this wasn't available on the ksd one??

havent got that far yet mate 

no clouds yet then robby?

[boyofford]

Probably do right checking it over first though since
a) its a bit unknown
b) you know how!

[robby]

Jul 15, 2014 12:04:38 GMT boyofford said:

Jul 15, 2014 12:03:42 GMT robby said:

havent got that far yet mate 

no clouds yet then robby?

To be honest, clouds dont interest me, it`s the heat I want for the flavour and can already tell at 16 watts that it is a big improvement in flavour. A bit like the difference between cold tea and hot tea

[decoy]

Jul 15, 2014 11:01:36 GMT BrenD said:

www.ebay.co.uk/itm/2x-30A-Torchy-2100mAh-Flat-Top-18650-3-7v-Li-ion-batteries-protective-case-/301217927886?pt=UK_ConsumerElectronics_Batteries_SM&hash=item4621fcd2ce

Would they be suitable batteries for the mod, or should I try and find the Sony ones? Torchy has come up trumps every time I've needed batteries in the past and I'd like to continue buying from him if at all possible.

i got 2 of these but nipple tops for sub ohming and they are the sonys i thinks as they have this on them
us18650vtc4

[robby]

Really hard to tell who makes this, not a hint anywhere

[robby]

Jul 15, 2014 12:09:53 GMT decoy said:

Jul 15, 2014 11:01:36 GMT BrenD said:

www.ebay.co.uk/itm/2x-30A-Torchy-2100mAh-Flat-Top-18650-3-7v-Li-ion-batteries-protective-case-/301217927886?pt=UK_ConsumerElectronics_Batteries_SM&hash=item4621fcd2ce

Would they be suitable batteries for the mod, or should I try and find the Sony ones? Torchy has come up trumps every time I've needed batteries in the past and I'd like to continue buying from him if at all possible.

i got 2 of these but nipple tops for sub ohming and they are the sonys i thinks as they have this on them
us18650vtc4

I`m using flat tops and it`s fine, so nipple tops should be good too

[BrenD]

Jul 15, 2014 12:13:57 GMT robby said:

Jul 15, 2014 12:09:53 GMT decoy said:

i got 2 of these but nipple tops for sub ohming and they are the sonys i thinks as they have this on them
us18650vtc4

I`m using flat tops and it`s fine, so nipple tops should be good too

Trigger pulled. I'm getting excited now

Sent from my HTC One_M8 using proboards

[robby]

The 510 connector appears to be brass, mine was pretty tight when putting the atty on it first time. Tight enough to not know when to stop, so you need to be careful with it until the threads have worn in a bit. A few in and outs and it just right now................... as the actress said to the bishop

[decoy]

im holding out for the zna clone because it looks like something of dr who

[robby]

Jul 15, 2014 12:00:39 GMT dalealan said:

Jul 15, 2014 11:52:05 GMT robby said:

First worry was the resistance reading on these, but mine is spot on. I have a couple of 1 ohm high stability 10 watt resistors in series on an atty and they ARE reading 2.0 ohms

Can you lock the voltage/wattage in and put it in stealth mode like the original robby Sure I read somewhere that this wasn't available on the ksd one??

Have you any idea how to do that dalealan, the instructions are very basic

[dalealan]

Jul 15, 2014 12:23:38 GMT robby said:

Jul 15, 2014 12:00:39 GMT dalealan said:

Can you lock the voltage/wattage in and put it in stealth mode like the original robby Sure I read somewhere that this wasn't available on the ksd one??

Have you any idea how to do that dalealan, the instructions are very basic

robby

Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show “Locked, Click 5X”. To exit Locked mode, press the fire button 5 times.

Stealth mode: While locked, pressing the fire and down buttons simultaneously for five seconds will switch to stealth mode. In this mode the display is off. It will still show error and lock messages. To switch back to normal display mode, hold down the fire and down buttons simultaneously for 5 seconds. This setting is stored to internal flash memory, and remains if power is removed.

Right mode & left mode: While locked, holding the fire and up buttons simultaneously for 5 seconds flips the display. This setting is stored to internal flash memory, and remains if power is removed.

Power locked mode: Holding down both the up and down buttons for two seconds will place the device in Power Locked mode. In this mode, you will not be able to change the power setting. This mode prevents accidental power level changes due to the buttons being pressed while in a pocket. To exit Power Locked mode, hold the up and down buttons for two seconds

[robby]

It all seemed to work dalealan but I cant get the display back lol

[robby]

Got it back lol
Everything seems to work except the flip dalealan, no biggy though